Punkdad
Active Member
- First Name
- Drew
- Joined
- Jan 15, 2020
- Threads
- 2
- Messages
- 28
- Reaction score
- 56
- Location
- Fishhawk, FL
- Vehicle(s)
- 2020 JLUR Ocean Blue
Sponsored
That price sounds good to me, I would prefer the Higher Output lights.Ok, we have these designed and BOM completed. To use the high-end LEDs for best light coverage and durability these will work out to have a MSRP of $99.95 and we would do a Groupbuy to let everyone who supported the idea get a special introductory Groupbuy price of $79.95
Let us know how you feel the price point is, we can spec a lower-end LED which will reduce output by 5-10% but we can get the price down to $89.95 MSRP and $69.95 Groupbuy.
Share your thoughts please!
One more question and maybe I missed it on and earlier post, But these are for the factory steel bumper correct?Ok, we have these designed and BOM completed. To use the high-end LEDs for best light coverage and durability these will work out to have a MSRP of $99.95 and we would do a Groupbuy to let everyone who supported the idea get a special introductory Groupbuy price of $79.95
Let us know how you feel the price point is, we can spec a lower-end LED which will reduce output by 5-10% but we can get the price down to $89.95 MSRP and $69.95 Groupbuy.
Share your thoughts please!
I am for sure good with it (Steel Bumpers / Rubicon)Ok, we have these designed and BOM completed. To use the high-end LEDs for best light coverage and durability these will work out to have a MSRP of $99.95 and we would do a Groupbuy to let everyone who supported the idea get a special introductory Groupbuy price of $79.95
Let us know how you feel the price point is, we can spec a lower-end LED which will reduce output by 5-10% but we can get the price down to $89.95 MSRP and $69.95 Groupbuy.
Share your thoughts please!
Steel bumper or plastic...? What is the existing port? Thanks!We appreciate the continued enthusiasm! With the final adjustments now made we are going to be building prototype parts for beta testing before opening molds. There is a possibility of doing a group buy if there is interest. Just want to be sure we explain that manufacturing takes a while, tooling, processing, assembly, etc all while following our Control Plan and taking the correct QC steps along the way will take some time.
A few things to note:
1) We were able to design to install without having to drill any holes. Even though the bumper was not designed to have a cable outlet we were able to use an existing port for the cable to exit.
2) Power can be pulled from the reverse lights or aux switch not both (unless you have some wiring knowledge and use diodes). To get power from the reverse light the cable whip can easily be routed to the tail lamp on either side. The cable routing is very simple. The + and - wires will need to be tapped to get power from the factory tail light.
3) Tools needed for the installation: 7mm socket with swivel adapter.
4) Anticipated installation time: Less than 1 Hour.
Any other questions let us know!
Higher outOk, we have these designed and BOM completed. To use the high-end LEDs for best light coverage and durability these will work out to have a MSRP of $99.95 and we would do a Groupbuy to let everyone who supported the idea get a special introductory Groupbuy price of $79.95
Let us know how you feel the price point is, we can spec a lower-end LED which will reduce output by 5-10% but we can get the price down to $89.95 MSRP and $69.95 Groupbuy.
Share your thoughts please!