Suffolklou
Well-Known Member
- First Name
- Lou
- Joined
- Dec 3, 2019
- Threads
- 5
- Messages
- 686
- Reaction score
- 1,053
- Location
- Richland Wa
- Vehicle(s)
- 2020 JLUR
thxI did above a few posts. All good now. Been driving 30 miles and all good.
Sponsored
thxI did above a few posts. All good now. Been driving 30 miles and all good.
Yes, try this. Go into your TazerJL settings with engine off, then two start button presses until the start button light is on Run.
Enter the TazerJL's Lighting settings and find the Front Led Trn option, which should currently be on. Turn that setting off, then on again and while on that screen, put your left blinker on and let it fast blink until it finally blinks at a normal rate. Reboot and power cycle.
Now repeat all of that, except put the right blinker on until the fast blink stops and the right blinker flashes at a normal rate. Reboot and Power Cycle.
If one gets out of line later, just repeat this for that side.
I think I'm describing this correctly, but let me know if it isn't working and I'll check it on mine again.
Hopefully that will take care of it.
UGREEN Mini USB Cable USB 2.0 Type A to Mini B Cable Data Charging Cord Compatible for GoPro Hero 3+, Hero HD, PS3 Controller, Phone, MP3 Player, Dash Cam, Digital Camera, SatNav, GPS Receiver,PDA 3ft https://www.amazon.com/dp/B00P0GI68M/ref=cm_sw_r_cp_api_fabc_j6iSFbK6FJKXESo I'm finally getting my Tazer out again after a year and a half, only to realize that I can't find the cable that comes with it to plug into my laptop to update the firmware. I know it's not a typical USB cable, can anyone tell me what it's called? *Sorry for dumb question*
It's still in the development stage. Use this link to view the discussion on the JL Wrangler Facebook page. h t t p s://w w w.facebook.com/1190745830/videos/10224137925534470/ Close up the gaps and it should work ... the forum wouldn't let me publish it correctly.Looks like the latest update has 3rd brake light pulse. Can't seem to find the setting in the menu yet, unless it's a built in/always active feature?
Thanks for the link. I got the new update loaded, don't see the two new options he mentions are now active. Need to go back out to the garage and do some more scrolling.It's still in the development stage. Use this link to view the discussion on the JL Wrangler Facebook page. h t t p s://w w w.facebook.com/1190745830/videos/10224137925534470/ Close up the gaps and it should work ... the forum wouldn't let me publish it correctly.