Cwelroy
Well-Known Member
Will do. Thanks again for the info. One more (possibly stupid) question— should I go with a 1/4 or a 3/8 torque wrench? Or does it really matter?Your bumpstops shouldn’t push your tire away from the bracket, if they are to long you could be tightening the tire against the stops and not the wheel against the relo bracket.
You can put them on before you put your spare on for a snug fit but you just want them touching the back of your tire to reduce any flexing. If you are close to an auto parts store or harbor freight I would rent or buy a torque wrench (you will use it lots on your Jeep) check the torque on your relocation bracket and spare.
Sponsored