Terrymo
Well-Known Member
I did what @Rhinebeck01 suggested and removed the rubber trigger with tweezers from the circuit board before I switched to an aftermarket model m key fob.First with panic button.
Sponsored
I did what @Rhinebeck01 suggested and removed the rubber trigger with tweezers from the circuit board before I switched to an aftermarket model m key fob.First with panic button.
I have a smart aftermarket key with display, so I need to physicaly disable the connection to that button. But if there is possibility to turn it off via OBD I will do that.@Cartman
Read here to learn how to easily physically disable or desensitize a bit, the panic button on a JL/JT fob. . Reversible methods and does not damage the fob circuit board..
https://www.jlwranglerforums.com/forum/threads/keyfob-now-30-smaller.75423/post-1572767
There was no hiding it lol, I'm fumbling around in the dark with the keyfob trying to shut it off, and instead I apparently hit the remote start. 392 with the open bypass startup and now the headlights on too. I left -very- early the next morning...rule number one, act like it was not you.
I had never heard of a panic button till I came to this forum. Across Australia a panic button on a key fob is very rare but they can be bought through 3rd parties.First with panic button.
I see it on some mercedeses and this is also my first one panic button in key fob. But I dont like it.I had never heard of a panic button till I came to this forum. Across Australia a panic button on a key fob is very rare but they can be bought through 3rd parties.
No wonder you couldn't figure out how to turn off the panic button.I have a smart aftermarket key with display, so I need to physicaly disable the connection to that button. But if there is possibility to turn it off via OBD I will do that.
![]()
![]()
![]()
![]()
I could not find the key. And this one have HW keys on the back....the main problem was that I could not find the key and I tryed to muti it by closing door, start, lock, ulock... and nothing worked.No wonder you couldn't figure out how to turn off the panic button.
Shouldn't you have posted this thread in the Chinese knockoff forums?
The OEM FOB has a huge red PANIC button.
Third parties like…Holden?I had never heard of a panic button till I came to this forum. Across Australia a panic button on a key fob is very rare but they can be bought through 3rd parties.
This an ironic post. I just took my wife to the airport(literally just walked in the door and sat down). She requires me to go in with her to get checked in. I had parked in the short term parking at Sky Harbor. I got her squared away and was heading back to the Jeep. Thought I had it nailed. Ended up on the right level but the wrong end and for the life of me couldn't see or figure out how I screwed up. One push of the panic button and "Viola" Found my bad boy way down on the other end. I found it very useful Ha Ha....If you are in a large very dark parking lot with a few scary looking bad guys approaching you that button can become a very welcome friend! (don't panic)
But a better tent? Ours all have pockets on the sides and ceiling so I don't roll over my FOB, glasses, or anything else. I'd argue it's not a FOB design issue just simple use error.I've never intentionally used the fob panic button, nor have I ever heard of any acquaintances using it. That said, I still like the idea of it.
After rolling over my fob in my tent at 2:00 AM in a crowded and peacefully sleeping campground and several other unintended panic deployments, I popped my key fob open and trimmed the rubber on the back of the button. You can still use it but it now takes a determined press of the button.
LF
Agreed, the tent was fine - this was total operator error.But a better tent? Ours all have pockets on the sides and ceiling so I don't roll over my FOB, glasses, or anything else. I'd argue it's not a FOB design issue just simple use error.