Drop in kill switch, no splicing

[azjl#3]

LASFIT has a hood locking product:
Lasfit Stealth Anti-Theft Automatic Hood Lock System for 18-23 Jeep Wr

yeah but, by defenition, if they hack your keyfob, they got this thing broken as well.

Sponsored

 

[Panda Mafia]

yeah but, by defenition, if they hack your keyfob, they got this thing broken as well.

Think Tazer have a product to prevent key hacking .

 

[Apexcars]

I wonder what is the problem with this system and the e-torque and the Stop/Start feature? Is it that the car won't start back up when you take the foot off the brake at a light if you don't have the Stop/Start button on the dash pushed? What about if you have the Stop/Start button on the pushed to turn off that feature if the Mobilistic system will still work? It should be just a simple relay for the starter system with a radio controlled function that opens and closes a contact point in the relay.

I hope the Mobilistic system will work if I have my Stop/Start Feature button pressed in on the Dash. I always disable the Stop/Start feature when I start up the vehicle. Occasionally, I forget to do that.
Anyways, I ordered one and I am going to give it a try and hope that it will work the way I hope it will.

Why not just reach out to them and ask. I would assume it has something to do with hooking it up to a 48 volt system instead of a 12 volt system but I didn’t try to look up anything about it. I doubt it’s the stop start though because non etorque Jeeps have that too.

 

[Nokones]

Why not just reach out to them and ask. I would assume it has something to do with hooking it up to a 48 volt system instead of a 12 volt system but I didn’t try to look up anything about it. I doubt it’s the stop start though because non etorque Jeeps have that too.

I tried to reach to them both email and a voicemail message and so far, there is no response.

 

[Terrymo]

Here’s an option from JW2 Innovations. Anyone have first hand experience with this product?
https://www.jw2innovations.com/?s=&ymm_search=1&post_type=product&_make=Jeep&_model=Wrangler-All Models&_year=2023

 

[JeepinJason33]

I used the one @maestro5531 makes. It is the stop/start kill switch and installed really easily. You pick out your own switch.

 

[m3reno]

I used the one @maestro5531 makes. It is the stop/start kill switch and installed really easily. You pick out your own switch.

Do you have a link to the product?

 

[azjl#3]

Here’s an option from JW2 Innovations. Anyone have first hand experience with this product?
https://www.jw2innovations.com/?s=&ymm_search=1&post_type=product&_make=Jeep&_model=Wrangler-All Models&_year=2023

Looked at their stuff, not bad. Be careful if you live in an emissions test area, if they find an OBD modified, they can fail your car in a very bad way, as in messed up title.

 

[Flip]

Found this on the internet. https://41twentytwo.com/product/vehicle-kill-switch/

I had considered this same kill switch. They have a YouTube video that shows the install. Really easy, plug & play. I just haven't gotten around to it yet but it looks like a good option to me.

 

[Membrain]

yeah but, by defenition, if they hack your keyfob, they got this thing broken as well.

I plug it in and lock it, then I unplug it and hide the OBD connector. It stays locked until I know to reconnect it if/when I want to get under the hood.

 

[JeepinJason33]

Do you have a link to the product?

This is where I first saw it. I don't think he sells anything else. All I know is it worked really well for me and was cheaper and easier to install than anything else I have seen.

https://www.jlwranglerforums.com/fo...tton-kill-switch-install.127505/#post-2683385

 

[au176]

I wonder what is the problem with this system and the e-torque and the Stop/Start feature? Is it that the car won't start back up when you take the foot off the brake at a light if you don't have the Stop/Start button on the dash pushed? What about if you have the Stop/Start button on the pushed to turn off that feature if the Mobilistic system will still work? It should be just a simple relay for the starter system with a radio controlled function that opens and closes a contact point in the relay.

I hope the Mobilistic system will work if I have my Stop/Start Feature button pressed in on the Dash. I always disable the Stop/Start feature when I start up the vehicle. Occasionally, I forget to do that.
Anyways, I ordered one and I am going to give it a try and hope that it will work the way I hope it will.

Please let us know if it works...

 

[Heimkehr]

I used the one @maestro5531 makes. It is the stop/start kill switch and installed really easily. You pick out your own switch.

Ditto. $30 shipped and as effective as the installer's ability to hide the owner-supplied SPST switch.

 

[au176]

Ditto. $30 shipped and as effective as the installer's ability to hide the owner-supplied SPST switch.

I'm assuming a JL Start Button? If so, I'm dropping $30 plus an SPST, as long as it works with E-Torque!

 

[JeepinJason33]

I'm assuming a JL Start Button? If so, I'm dropping $30 plus an SPST, as long as it works with E-Torque!

I have a 2021 Etorque, the start stop button is the same regardless of the Etorque or not.

Sponsored