Predatorjl
Member
- First Name
- Eric
- Joined
- Jul 9, 2020
- Threads
- 1
- Messages
- 14
- Reaction score
- 9
- Location
- New Hampshire
- Vehicle(s)
- 2018 Jeep Wrangler Sahara JLU Mojito
Okay so here's a new one for you guys. I've read this entire thread and It only accounts for factory axles.
How about aftermarket axles. I just finished installing Ultimate 60s front and rear on my JLS.
Full RK 3.5 X Factor all adjustable arms. Steer Smarts Tierod and Drag link as well as Trackbar. 40 inch Nitto Trail Grapplers and Adams Driveshafts front and rear.
Spicer says run 4.8. Before the axle swap I was at 5.5.
Seeing most are finding success around 6. Any input.
How about aftermarket axles. I just finished installing Ultimate 60s front and rear on my JLS.
Full RK 3.5 X Factor all adjustable arms. Steer Smarts Tierod and Drag link as well as Trackbar. 40 inch Nitto Trail Grapplers and Adams Driveshafts front and rear.
Spicer says run 4.8. Before the axle swap I was at 5.5.
Seeing most are finding success around 6. Any input.
Sponsored