humrk311
Active Member
- First Name
- Ron
- Joined
- Jan 12, 2020
- Threads
- 5
- Messages
- 36
- Reaction score
- 17
- Location
- Ashford CT
- Vehicle(s)
- 2018 Wrangler Sahara Unlimited / 1999 BMW R1100S / 1998 BMW M3
Suggest returning those hinges and buying them elsewhere. You've been charged around 50% mark-up on suggested retail!Wondering if anyone can help with some advice to DIY this repair.
I purchased one of the first JLUs and am unfortunately 3 months past my corrosion warranty. This was the first time Ive ever purchased a new car. Ive never needed to use a car warranty so I didnt think of going in for the issue sooner. My dealers body shop ballparked about $10,000 for the repairs out of pocket since the corrosion is on every door and hinge including hood and tailgate.
I used the service bulletin to talk to my dealer's parts department and they have lots of the new hinges in stock with the new zinc shim. I can get 12 hinges unpainted for about $1300. I think I can get them powdercoated for less than $200. I have a black jeep so the color should be close enough. Im wondering how I should tell them to tape off the zinc portion of the hinge though - they need to get edge on the back but not the zinc I think. Any advice?
If I take off the doors one at a time, I can sand off the corroded part. Id just need primer, top coat, and clear coat sprays after that with very fine grit sanding in between. Im not that experienced in this kind of work but I would research more and im pretty confident i could figure it out. Or maybe I can take the doors off and ask a body shop to spray for me too.
Im thinking this is going to be the cheapest way to preserve my Jeep for another 5 years before the corrosion keeps spreading. Hopefully the cost would come to $2000-$2500 if im lucky.
If someone thinks they can talk me out of this I would really appreciate it.
![]()
![]()
![]()
![]()
![]()
![]()
A 68282145-AC hinge retails for $145 ea, MOPAR Parts Giant sells them for $95.35 ea.
Sponsored