Sweetpea
New Member
I am thinking about going with this same setup. What solution did you use for the safety cables? I don’t see a good place to hook them up.Thought I would share my latest winch and tow loop set up on my JL. Winch plate, winch hook anchor, filler trip plates, and JL tow loops from www.maximus-3.com. Winch is the Rubicon version of the Warn winch but I bought from www.moparonlineparts.com as they seemed to have the best price at the time and had it in stock.
Tow loops are not on the Maximus-3 website yet due to very limited quantities but they are heavy duty and fit great - I think they are the cleanest setup I have seen. Did not want a square-tube bar mounted under my bumper for towing. You do have to cut slots in the bottom side of the bumper but that was not too hard as long as you have a metal cutting hole saw ($10 at ACE Hardware) and a cut-off wheel for your grinder. The instructions included show using a 1.5" hole saw and making a 1.5" channel in the bottom of the bumper. With the tow loop being 5/8" thick, I chose to use a smaller 1" hole saw and cut a 1" channel and had no problems (forgot to take a picture of that).
On the winch plate install, I did have to do a little grinding on the winch plate to make it fit. Mainly because there was some excess weld on one side of the Jeep near a bracket and that bracket on the Jeep appeared to be in a slightly different location from the left side vs the right side. Maybe 1/16" different but that was enough to need to grind down the winch plate slightly so the bolt holes would line up (did not want to grind on the Jeep). Easy fix though.
Have not dealt with the towing wiring harness yet. Still debating whether to go with Cooltech's product or wait for Mopar's JL flat-tow wiring harness. No near-term RV trips so not is a huge hurry on that. Also dreading reinstalling the braking system again after pulling it out of my JK. Looks like a big pile of spaghetti now with all of the wires thrown in a box. Will need some motivation to tackle that one one of these days. Hope the included pictures give a few folks some ideas on possible towing/winch setups. I like mine.
Thanks JB
Sponsored