Steering stabilizer relocation

[Fftoddster]

I have 2 dr Rubicon with Clayton 1 1/2” lift (closer to 3”) complete with control arms and track bar. Running BFG 315 KO2s.
No complaints in fact love how it drives on and off road. No steering issues.
The problem is a rock from John Bull dented my steering stabilizer. Still fairly new to the Jeep world and all the mods.
So question is what’s a good option to replace the stabilizer hopefully relocating it to a safer location. Was very happy with performance I had so don’t need anything exotic. Just want something that works as well, just keeps it further away from rocks.
thx.

Sponsored

 

[Fftoddster]

I have 2 dr Rubicon with Clayton 1 1/2” lift (closer to 3”) complete with control arms and track bar. Running BFG 315 KO2s.
No complaints in fact love how it drives on and off road. No steering issues.
The problem is a rock from John Bull dented my steering stabilizer. Still fairly new to the Jeep world and all the mods.
So question is what’s a good option to replace the stabilizer hopefully relocating it to a safer location. Was very happy with performance I had so don’t need anything exotic. Just want something that works as well, just keeps it further away from rocks.
thx.

It’s a 2022 if that matters with 6cyl

 

[GaryToo]

Rock jock has a couple brackets to mount it higher

 

[Roky]

I have 2 dr Rubicon with Clayton 1 1/2” lift (closer to 3”) complete with control arms and track bar. Running BFG 315 KO2s.
No complaints in fact love how it drives on and off road. No steering issues.
The problem is a rock from John Bull dented my steering stabilizer. Still fairly new to the Jeep world and all the mods.
So question is what’s a good option to replace the stabilizer hopefully relocating it to a safer location. Was very happy with performance I had so don’t need anything exotic. Just want something that works as well, just keeps it further away from rocks.
thx.

You’re running Clayton, here’s their kit…… I’m not a big fan of the U bolt design aesthetically, but it works… I prefer a billet clamp for tie rod, I think they look a lot nicer, but that’s just my opinion…..

https://www.northridge4x4.com/scp/s...MA8rfX6NjxNEGsAmO1gdgQdiyIajaFyCdY4pFKqBAZ1ej

 

[LukeDagny]

Are there any relocation brackets that work with a Fox or Teraflex thru shaft damper?

 

[shane h.]

Are there any relocation brackets that work with a Fox or Teraflex thru shaft damper?

I used a Metalcloak relocation bracket and an Apex Chassis 2" clamp to mount my Fox ATS. Works just fine. This is a view of both bracket and clamp with the Jeep at full turn to the passenger side.

(Yes, I know the mounting bolt is loose in this pic. Taken during install.)

 

[Roky]

Are there any relocation brackets that work with a Fox or Teraflex thru shaft damper?

Yes, the synergy clamp you get the flat head bolt to convert it, I’m using it on mine…you can also take the regular bolt to the parts house and match it up with flat head, cheaper ….

https://www.northridge4x4.com/part/...dev|m&gad_source=1&gad_campaignid=23556376517

 

[LukeDagny]

Thanks for the info and pictures

Sponsored