Steering Stabilizer Question

[AVGeek99]

I'm sorry for a potentially dumb question.

Is there any reason why this (link below) would not fit my 2021 JLUR? I have a 3.5" lift. This page says it's for a JK, but it looks like it would mount to the top of the tie rod, which is what I'm looking for, my tie rod is 1 5/8". The one they sell that says it's for a JL comes with the bracket to mount to the axel in the stock location, which I don't want.

https://www.northridge4x4.com/part/stabilizers/983-02-146-fox-2-0-ats-steering-stabilizer

Sponsored

 

[Roky]

I'm sorry for a potentially dumb question.

Is there any reason why this (link below) would not fit my 2021 JLUR? I have a 3.5" lift. This page says it's for a JK, but it looks like it would mount to the top of the tie rod, which is what I'm looking for, my tie rod is 1 5/8". The one they sell that says it's for a JL comes with the bracket to mount to the axel in the stock location, which I don't want.

https://www.northridge4x4.com/part/stabilizers/983-02-146-fox-2-0-ats-steering-stabilizer

That’s what a lot of guys are doing, including me….. just make sure to get the right size clamp if you have an aftermarket tie rod…
Old pic for reference, running a different setup now…..

 

[AVGeek99]

That’s what a lot of guys are doing, including me….. just make sure to get the right size clamp if you have an aftermarket tie rod…
Old pic for reference, running a different setup now…..

That's kind of what I thought. Thanks for confirming. Did you need a special bolt at the drag link mount or did it come with it?

 

[Roky]

That's kind of what I thought. Thanks for confirming. Did you need a special bolt at the drag link mount or did it come with it?

Mine came with a track bar bolt years ago…. You can use any axle side bracket you want though… I wouldn’t recommend MC , it’s designed to work with its own tie rod clamp…

 

[Northridge4x4]

I'm sorry for a potentially dumb question.

Is there any reason why this (link below) would not fit my 2021 JLUR? I have a 3.5" lift. This page says it's for a JK, but it looks like it would mount to the top of the tie rod, which is what I'm looking for, my tie rod is 1 5/8". The one they sell that says it's for a JL comes with the bracket to mount to the axel in the stock location, which I don't want.

https://www.northridge4x4.com/part/stabilizers/983-02-146-fox-2-0-ats-steering-stabilizer

Yes, go with a JK stabilizer, they work great.

just make sure to get the right size clamp for your tie rod…

^^^What @Roky siad^^^

 

[AVGeek99]

Yes, go with a JK stabilizer, they work great.



^^^What @Roky siad^^^

Thanks for confirming. Just placed my order!

Sponsored