Oracle flush mount tail lights!!!

[Mikester86]

I like the look of the flush mounted lights, but it’s low on the list of mods for me personally. I like the factory LED’s just fine and if it’s isn’t broken, I will not tempt fate here. ?

Sponsored

 

[Jazzicon]

Ordered, now I won’t have to worry about smashing my taillight when my Rotopax is mounted. Finally ordered something that is an actual solution to a legitimate problem I created ?

 

[gek]

They missed to place a reflector in the middle where they have black plastic with framed in branding.

Would make it street legal and look comple.

That is where the Blind Spot Monitoring sensor goes. They sent stick on reflectors in the box, but I doubt anyone puts them on. I thought about putting them on the side of my bumper ... right before I remove it.

 

[vegasblue]

I have all the hyperflashing and warning inside the vehicle. Just an update. I love the way they look 100%. I have the Tazer Light. I'll move to the mini so I can get rid of all the issue if Oracle doesn't come up with a solution soon. (which means I'll be upgrading, ha!)

 

[ORACLElights]

Thought I was gonna get lucky and have no problems but was out driving today and the dash shot me a "left tail light out" notification. If anyone hears how to stop that please let me know. Thanks

Send us a PM and we will be happy to help you with this!

 

[aldo98229]

So, i received the Oracle flush mount tail light with integrated blind spot monitor lights today, i am absolutely over the moon with them. Me and my daughter fitted them this afternoon. It took us about an hour to disassemble the old units to get at the blind spot sensors and reassemble into the new unit but it was easy and seamless! Thank you to Oracle Lighting for coming up with something that has enhanced the rear end of my Jeep and eliminated those bulky stock tail units. I LOVE them!

Looks good...but I bit too much like a Ford Bronco...!

 

[rubiria]

Looks good...but I bit too much like a Ford Bronco...!

I was thinking the exact same thing! I wonder if they made protruding ones for the Bronco as well...

 

[Nixxxster]

Anyone selling their old OEM LED tail light?

 

[SSVi]

Threedom better be working on an activity key fob bracelet!!! Im dying for one!!!! I love my lil fob from them. Even got a pink one for the kid.

I also have these tail lights, they’re awesome! Though I think I need the details on this fob you speak of…

 

[CarbonSteel]

I read through most of this and there is still a question in my mind:

Do these throw codes "always"? Or does it only on happen OEM equipped LED Jeeps? Or does this only affect non-LED Jeeps?

@Rhinebeck01

 

[Heimkehr]

I read through most of this and there is still a question in my mind:

Do these throw codes "always"?
Or does it only on happen OEM equipped LED Jeeps?
Or does this only affect non-LED Jeeps?

If the owner feedback in this thread (and the other one still active at this time) is accurate, the flush mount LED tail lights will function correctly on Wranglers with original halogen tail lights. No hyperflash nor dashboard error codes have been observed. Just plug and play.

N.B.: In the foregoing instance, the installer should be careful to use the included resistors. You'll need some double-sided tape to secure them to the vehicle, also, since it's not included (despite the installation video illustrating that it is provided.)

Wrangler owners with OEM LEDs are likely to experience, at a minimum, dashboard error codes, even if the Oracle tail lights otherwise function correctly when viewing them on the rear of the vehicle.

 

[CarbonSteel]

If the owner feedback in this thread (and the other one still active at this time) is accurate, the flush mount LED tail lights will function correctly on Wranglers with original halogen tail lights. No hyperflash nor dashboard error codes have been observed. Just plug and play.

N.B.: In the foregoing instance, the installer should be careful to use the included resistors. You'll need some double-sided tape to secure them to the vehicle, also, since it's not included (despite the installation video illustrating that it is provided.)

Wrangler owners with OEM LEDs are likely to experience, at a minimum, dashboard error codes, even if the Oracle tail lights otherwise function correctly when viewing them on the rear of the vehicle.

OK; thanks for the clarification. I have the OEM LEDs and this would be a hard pass for me.

Adding diodes and experiencing error codes is not something I'm going to pay to have happen.

 

[TX_Ovrlnd]

OK; thanks for the clarification. I have the OEM LEDs and this would be a hard pass for me.

Adding diodes and experiencing error codes is not something I'm going to pay to have happen.

They're wire-wound resistors and are not needed if you have factory LEDs.

The canbus issue is fixable with a tazer or jscan.

 

[music293]

Tail lights look nice. And I'm especially interested in anything that makes the reverse lights brighter, since the stocks are pretty dim.

Two quick questions for anyone in the know:

1) I don't seem to find them on the site. Probably just missed them. Anyone have a link?

2) What's up with the space with the oracle badging on the light? Seems like dead/wasted space. Does it like pop out and accept another reverse light or something?

Cheers!

 

[TX_Ovrlnd]

Tail lights look nice. And I'm especially interested in anything that makes the reverse lights brighter, since the stocks are pretty dim.

Two quick questions for anyone in the know:

1) I don't seem to find them on the site. Probably just missed them. Anyone have a link?

2) What's up with the space with the oracle badging on the light? Seems like dead/wasted space. Does it like pop out and accept another reverse light or something?

Cheers!

1) click new products from main page and it's on the 2nd row

2) It covers the blindspot monitoring sensor, you don't want anything dense or electrical over that. It can be changed out, Threedom is working on replacements, if you don't have BSM you could fab up a light solution.

Sponsored