Dyolfknip74
Well-Known Member
- Joined
- Mar 18, 2021
- Threads
- 37
- Messages
- 5,261
- Reaction score
- 9,086
- Location
- Ottawa, Ontario, Canada
- Vehicle(s)
- 2021 JLU Rubicon
- Thread starter
- #1
Hey all, trying to trace an issue here and hoping someone with above configuration can help.
When I install the lights I get a BSM lost communication left side error on JScan along with the dashboard fault. I've reseated a few times to no avail. Tried disabling code as well. No go.
When info a deep scan with JScan I also get a fault for rear plate light because I have disconnected that light and relocated it to the spare.
What I am hoping someone can do, that has the LEDs, BSM and Oracle Flushmounts is simply unplug your plate light (inside rear bumper on drivers side) and cycle the motor a few times just to see if it kills the BSM.
I can buy a new harness and light if this is the fix, no big deal. Your BSM will come back as soon as it's connected again. It's not an engine code so it clears itself.
Any help would be much appreciated.
Thanks.
When I install the lights I get a BSM lost communication left side error on JScan along with the dashboard fault. I've reseated a few times to no avail. Tried disabling code as well. No go.
When info a deep scan with JScan I also get a fault for rear plate light because I have disconnected that light and relocated it to the spare.
What I am hoping someone can do, that has the LEDs, BSM and Oracle Flushmounts is simply unplug your plate light (inside rear bumper on drivers side) and cycle the motor a few times just to see if it kills the BSM.
I can buy a new harness and light if this is the fix, no big deal. Your BSM will come back as soon as it's connected again. It's not an engine code so it clears itself.
Any help would be much appreciated.
Thanks.
Sponsored
