New 3.0 Power/Options device!

[Mike@Powerteq]

My family and I are moving to BC, Canada by the end of the year, once I get there, EGR deletes are legal. How does your system function with a deleted EGR?

Not something we have tested or plan to test unfortunately.
If the vehicle is ok with it., the Pulsar will be too

Sponsored

 

[BAKNBLK]

Usually Dyno is done in a 1-1 gear to be accurate. If it was that impressive #'s!

 

[Ratbert]

Question the Dyno sheet you posted was on a tire Dyno so actual HP/TQ to the ground?
I assume with stock tires?
This was done in 6th gear?

It's SAE corrected, so it's been adjusted by 15%.

 

[Mike@Powerteq]

It's SAE corrected, so it's been adjusted by 15%.

SAE just standardizes the values for comparison sake, its not a blanket 15%.

Regardless, as long as both before and after pulls are run in the same manner, all that matters is the delta between the two

 

[Ratbert]

SAE just standardizes the values for comparison sake, its not a blanket 15%.

Regardless, as long as both before and after pulls are run in the same manner, all that matters is the delta between the two

Assuming the same temperature and humidity for both runs. That can be challenging.

 

[Mike@Powerteq]

Assuming the same temperature and humidity for both runs. That can be challenging.

With what we are doing, we can run stock and tuned within 5-10 min of each other.
All of our testing is done with a full emissions setup as well, so all conditions, including temp and humidity are monitored.

Sponsored