cswilliams75
Member
- First Name
- Chris
- Joined
- Jul 7, 2021
- Threads
- 2
- Messages
- 13
- Reaction score
- 30
- Location
- Richmond, TX
- Vehicle(s)
- 2019 Wrangler Unlimited Rubicon
Great. Thank you for taking the time to help. Much appreciated.
Sponsored
This is how it begins. I only want to...So we have a 2019 Sahara that is stock and time for tires is coming.
Wife wants the Black Rhino Primm (black with brass bolts).
I really want to know what the largest size tire I can run with the stock Sahara. I like how 37 look but not sure if I would need to make a lot of other upgrades first.
Tires we are looking at Patagonia Milestar 33x12.5 or 37x12.5.![]()
Any knowledge on this is greatly appreciated!
![]()
![]()
![]()
I definitely would, but you don’t necessarily have to. It will still function, but may not be as enjoyable as before.Wouldn't a 35 or 37 require regearing also?
Yes on 37's. Automatic on 35's, not required.Wouldn't a 35 or 37 require regearing also?
I'm like baby steps here. I went to 33's and called it a day. Skipped the reprogramming and regearing aspects all together. No mods to the suspension. Did have to update the spare tire carrier. lol But I'm still rolling with a daily driver that can do mild trails and beach stuff. See you this weekend!!I definitely would, but you don’t necessarily have to. It will still function, but may not be as enjoyable as before.
I’ve found that the JL’s automatic transmission compensates quite well for larger tires, but you definitely need to reprogram the computer with a Tazer or Jscan to have the proper shift points. Also, one tire size up from factory is usually fine without a regear, but more than that, I think it’s worth it.
Which engine you have will also be a factor in determining proper gear set. The general consensus is that the 2.0T is great with 4.88’s and 37’s, whereas many with the 3.6L prefer 5.13’s with 37’s. There’s no 100% right answer and you’ll read a lot of different feedback on the forum.
I currently run 4.10’s with the 2.0T and 35’s, but 4.56 would definitely be best; however, it doesn’t bother me enough to justify the upgrade when I know I will go to 37’s when these wear out, and will want 4.88’s at that time. Gears are expensive enough that I think it makes the most sense to only do once for your end goal, rather than swapping with every tire change.
This is how it begins. I only want to...
You do not appear to be a serious off-roader. Most likely, you use your Jeep on light to medium trails and bad rural roads.
I would not go higher than 35's on a non-Rubicon Jeep. If you go higher, you will need to make a number of modifications to facilitate the change.
With 35's you may need to increase the height of the Jeep a bit. You can use a 2 inch lift or change out the suspension for a Rubicon suspension.
You might also have to get different fenders. The the taller wheels may cause your tires to rub on the fenders on some trails.
If you only want to change the wheels and not do anything else, 33's would be a good choice.
Remember. This is how it starts. One modification leads to another and then to another.
Keep us posted on the changes.