Magnetic Tazer JL Mini mount

[Kracka]

I was looking for a better solution than just stuffing the wires & Tazer up into the dash then bouncing around and eventually dangling down. I ended up finding and ordering this mount from Utah Design Foundry which appears to be a fairly slick little mount. I hadn't seen anyone mention it on here...but full-disclosure didn't really search that hard either.

https://www.utahdesignfoundry.com/products/tazer-jl-magnetic-mount

I was able to get it for $16.99 shipped using promo code WELCOMEBACK

Sponsored

 

[Rhinebeck01]

I was looking for a better solution than just stuffing the wires & Tazer up into the dash then bouncing around and eventually dangling down. I ended up finding and ordering this mount from Utah Design Foundry which appears to be a fairly slick little mount. I hadn't seen anyone mention it on here...but full-disclosure didn't really search that hard either.

https://www.utahdesignfoundry.com/products/tazer-jl-magnetic-mount

I was able to get it for $16.99 shipped using promo code WELCOMEBACK

Better to get a 3D printed holder offering that bolts on. I tested 2 different magnetic mount Tazer holders and they kept falling off...

This bolt on offering is the one I landed on. Priced right, ships fast and sold by a forum member..
Works great! He also has a similar holder for the ECRI dedicated security gateway bypass.
https://www.etsy.com/listing/1127929645/fits-jeep-wranger-jljt-z-automotive?click_key=98154caf08b3b40bcaf85bc3549d95a4aee9710c:1127929645&click_sum=99d4979b&ref=shop_home_feat_3&pro=1&frs=1 [/SIZE][SIZE=1]@JO DYRT

 

[Kracka]

Heck, for the price I'll order this one too! Thank you!

 

[Kracka]

Ordered.

 

[Odyssey USA]

I used Velcro.

 

[Kracka]

I used Velcro.

Sir, that's far too simple

 

[Odyssey USA]

Sir, that's far too simple

Right! I had it in the toolbox lol

 

[Kracka]

I should go steal my wife's 3M Command Strips...

 

[LARSONEM]

I used Velcro.

Me too. Velcro works great. Quick and simple.

 

[Rhinebeck01]

Me too. Velcro works great. Quick and simple.

I used Velcro for a couple years and yes, it works.... I do prefer though, having a dedicated Tazer JL holder...

One thing I like/prefer, is the end placement of the 3D printed holder...

Also, with the plastic holder the Tazer JL does not have to be pulled away firmly/forcefully from the mount position.. You need no space to pull the Tazer JL away as the Tazer JL comes out of the back of the plastic holder.

I can reach up and easily wiggle and remove the Tazer JL from the holder and can do this Tazer JL removal process without black plastic panel removal or any fuss....

Anyway, yes, Velcro will do it.... but to me, after using both can confirm the 3D plastic holder is a nice add..

.

 

[Rhinebeck01]

Talking 3D printed plastic adds for your JL/JT/JK..... This little cheapie add can save you a lot of headaches and a lot of $..
https://www.jlwranglerforums.com/fo...ver-obdll-port-protection.54022/#post-1173854

Can be had here.. The grill on the ESTY ad pic/ offering is not shown... but the grill will be on the cover you get. Seller apparently/I think, does not want to irk Stellantis so does not show grill in the ad/pic.
https://jeepsnapcaps.com/products/fits-jeep-obd-ii-plug-cap-black @JO DYRT

 

[Odyssey USA]

I used Velcro for a couple years and yes, it works.... I do prefer though, having a dedicated Tazer JL holder...

One thing I like/prefer, is the end placement of the 3D printed holder...

Also, with the plastic holder the Tazer JL does not have to be pulled away firmly/forcefully from the mount position.. You need no space to pull the Tazer JL away as the Tazer JL comes out of the back of the plastic holder.

I can reach up and easily wiggle and remove the Tazer JL from the holder and can do this Tazer JL removal process without black plastic panel removal or any fuss....

Anyway, yes, Velcro will do it.... but to me, after using both can confirm the 3D plastic holder is a nice add..

.

Sounds nice. I never needed to remove mine. Even got the extension wires. It’s secure though and didn’t cost hardly anything. Lightweight too. lol

 

[RatZero]

Damn, the bolt on one won't ship to Canada.

 

[Rhinebeck01]

Damn, the bolt on one won't ship to Canada.

Unfortunately, postage to Canada is quite pricey.

I totally understand why the seller will not ship free to buyer's outside of the Continental USA.

The postage on that holder, even though very small and very light in weight, would undoubtedly be more $ then what he sells the offering for.

A couple of years ago, I did a Canuck forum member a favor and purchased and mailed a small item to him. Was my pleasure to do it for him.... ----Can tell you that it cost about $20 postage to send the item to him from New York, via United States Post Office (Not Priority Mail either) . Weight for the item was less then an ounce..

Blame Canada for this..

 

[RatZero]

Unfortunately, postage to Canada is quite pricey.

I totally understand why the seller will not ship free to buyer's outside of the Continental USA.

The postage on that holder, even though very small and very light in weight, would undoubtedly be more $ then what he sells the offering for.

A couple of years ago, I did a Canuck forum member a favor and purchased and mailed a small item to him. Was my pleasure to do it for him.... ----Can tell you that it cost about $20 postage to send the item to him from New York, via United States Post Office (Not Priority Mail either) . Weight for the item was less then an ounce..

Blame Canada for this..

Yeah, unless it's flat and fits in an envelope it gets stupid expensive, not even considering if duty charges get added as a surprise later.

I'd rather support a Forum member, especially for a cool 3D design but I guess I'll download the Open Source file and print it myself.

Sponsored