Geometry correction bracket for spacer lift

[Robs JL]

Need a little help. Planning on getting a rough country spacer lift for my sahara that I daily drive and was wondering do I need to get a geometry correction bracket for a spacer lift or is not needed?

Sponsored

 

[AnnDee4444]

How much lift?

 

[Robs JL]

How much lift?

RC 2.5"

 

[Messup]

It will drive better with the geo bracket but will still get you to work without.

 

[Carlton]

They aren't required but personally I would add them. It will result in a much nicer ride. Correct caster, level control arms, reduce nose dive etc.

They are a cheap addition with many upsides. Rancho are one piece and can be had for $160 on sale. Rubicon Express now has a multi-piece set and they are about $100. Both do the same thing and will work great.

 

[Robs JL]

Thanks for the tips. I went ahead and ordered the Rancho brackets.

 

[Carlton]

Thanks for the tips. I went ahead and ordered the Rancho brackets.

Good choice. You will be surprised how heavy/beefy they are.

 

[mkunkel20]

Would the geometry correction be needed for the AEV 2 inch spacer lift kit?

 

[Stickerhead]

I have a 2” RE spacer lift on my JLUR and just installed the Mopar LCA is that they use on there Mopar lift kit. LCA’s are 1/4” longer. Increased the caster to around 6 degrees. Drives much better.

 

[mkunkel20]

I have a 2” RE spacer lift on my JLUR and just installed the Mopar LCA is that they use on there Mopar lift kit. LCA’s are 1/4” longer. Increased the caster to around 6 degrees. Drives much better.

What was the caster after you put the lift on?

 

[Stickerhead]

What was the caster after you put the lift on?

I will have to look at alignment sheet but it did not change much. Just remember 3+ degrees after.

Sponsored