TrailMax
Well-Known Member
Which unit is that? Do you have a link you could share?Here is the unit I ended up going with installed...wired into aux switch #4.
![]()
![]()
![]()
Sponsored
Which unit is that? Do you have a link you could share?Here is the unit I ended up going with installed...wired into aux switch #4.
![]()
![]()
![]()
AUTO-VOX Backup Camera https://a.co/d/3mfaO4sWhich unit is that? Do you have a link you could share?
Thanks, this seems to be just what I was looking for. I already have the Bulletpoint mount, so just need their 20mm to 17mm arm.AUTO-VOX Backup Camera https://a.co/d/3mfaO4s
On sale now 20% off so like 48 bucks. This is the dash setup I used with it:
Jeep Wrangler Dash Mount https://a.co/d/fzB4jeh
It is on sale too. If you have a setup you like already, with a 17mm ball, you would not need the dash part.
They make good stuff...I didn't know they offered different sizes in the ball mounts...score! The only mod that took any additional time was drilling a hole in the dash so I didn't have a wire running down just hanging there. I also used the pigtail that went to the supplied cigarette lighter power supply (and cut that apart so that I could make a quick connect with the positive to the aux switch bundled lead) and I grounded the negative to the a-pillar base (door strap mount). I then ran the other side of the wire through that plastic plug on the driver side and use the grommet to seal it when I popped it back in place. The unit comes with a little green wire and a little white wire and when you cut one of them it makes the image the proper orientation and the other wire (if cut) gets rid of the guide lines.Thanks, this seems to be just what I was looking for. I already have the Bulletpoint mount, so just need their 20mm to 17mm arm.
I pulled the climate control section of the dash (clips) and the radio (clips and screws for the surround, screws for the radio) to make the wire routing easier.They make good stuff...I didn't know they offered different sizes in the ball mounts...score! The only mod that took any additional time was drilling a hole in the dash so I didn't have a wire running down just hanging there. I also used the pigtail that went to the supplied cigarette lighter power supply (and cut that apart so that I could make a quick connect with the positive to the aux switch bundled lead) and I grounded the negative to the a-pillar base (door strap mount). I then ran the other side of the wire through that plastic plug on the driver side and use the grommet to seal it when I popped it back in place. The unit comes with a little green wire and a little white wire and when you cut one of them it makes the image the proper orientation and the other wire (if cut) gets rid of the guide lines.
Agreed. Hell's Revenge is night and day difference with the trail cam. All you can see is sky without one.Crawling around at night, especially up hills coming over the crest, its invaluable.
This is so true. A front cam in invaluable when climbing and cresting. You will appreciate it then.Agreed. Hell's Revenge is night and day difference with the trail cam. All you can see is sky without one.
Any slick rock trail really. Just follow the black tracks as a guide.Agreed. Hell's Revenge is night and day difference with the trail cam. All you can see is sky without one.
Pffft, what’s the fun in that? Roll up to what appears to be the edge of a cliff, too lazy to get out and check, have unreasonable trust in the white dotted line, roll off the edge sucking up underwear.Agreed. Hell's Revenge is night and day difference with the trail cam. All you can see is sky without one.
How about on Black Bear Pass when you can roll right near the edge while making a multipoint turn on a few of the tighter switchbacks? Would that still be a Woooooo haaaaa!!?Pffft, what’s the fun in that? Roll up to what appears to be the edge of a cliff, too lazy to get out and check, have unreasonable trust in the white dotted line, roll off the edge sucking up underwear.
Woooooo haaaaa!!
Ohh yeeeah!How about on Black Bear Pass when you can roll right near the edge while making a multipoint turn on a few of the tighter switchbacks? Would that still be a Woooooo haaaaa!!?![]()
That video makes me cringe everytime I see it.Ohh yeeeah!
![]()
I think the word you were looking for is "pucker."That video makes me cringe everytime I see it.
No… the word is… “FUCK”I think the word you were looking for is "pucker."