Working Brake Controller cable found

[Goheels050917]

Not bad at 350$. How hard is install? When you factor in price of controller, harness, tow harness that 350 is probably cheap.

to mount, 10 min, to wire, 10 min, to program, 3 min

Sponsored

 

[Moucf96]

The Cherokee hardness works perfect. Tekonsha 3014-Phttps://www.amazon.com/Tekonsha-3014-P-Control-Wiring-Adapter/dp/B00QRWR1YI/ref=sr_1_1?s=automotive&ie=UTF8&qid=1521509032&sr=1-1&keywords=tekonsha+3014

It works with the Tekonsha Prodigy P3 Brake Controller. Just hook the Gray Gray end of the plug to the Gray plug under the dash and the other end goes into the P3 brake control. It comes with a mount to mount under dash included.https://www.amazon.com/Tekonsha-901...521509393&sr=1-1-fkmr0&keywords=tekonsha+3014

You may want to use a different brand of brake control. This is just what worked for me.

So if you plug in the harness and controller then the brake system is good to go for the JLUR and trailer?

 

[JLURmojito]

Don't use the 3014 harness. Use a 3024 and swap the blue and black wires. No error codes on the dash!

 

[Moucf96]

Don't use the 3014 harness. Use a 3024 and swap the blue and black wires. No error codes on the dash!

I ended up getting a Curt harness to end confusion.

 

[Gogged]

I ended up getting a Curt harness to end confusion.

So the curt harness worked with the P3?

 

[Rhinozeroone]

I have been using the Tekonsha 3014-P. This works fine but it does turn off my stability control if I activate the trailer brake manually.

https://www.amazon.com/gp/product/B00QRWR1YI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[plex]

Okay, so modifying 3024-p is fairly easy, just switch the black and blue wires. Use something flat and small enough to push up the grey tab (red circle), while push the blade connector (blue circle) out.

 

[CRZYCDN]

I called the customer support for Reese....the main company makes all 3 brands, Draw tite, Reese and Tekonsha.
Reese 8508211 and Drawtite 5535 are the "Same" just different label on the front (says their Technical support)
As well I also found out that 3014 works but doesn't have the Diode (so don't use it!) 3073 is the correct pin-out with Diode (Correct for Wrangler) or use 3024 (Also has diode and is for the Ram) but just swap the black and blue wire on the grey connector end for the Wrangler.

Sponsored