Can you see an outline where it used to be thoughJust removed the warning label stickers from both visors. Used my hair dryer on high. Took about 15 minutes to do both visors. No residue left behind. Get them hot enough and they peel right off.
Yes, you can see the outline where the sticker was. However, it is not that noticeable.
I noticed you didn't get that black head liner foam board either. up on the panels its like almost 500 to have some real thin foam board thats just Velcro on for noise and help cool it off. i didn't have before or the soft tops cant have it so didn't waste my money on it. buts thats just my opinion on it but any way i will try this when i get my JL. I tried it on my JK but a few years had gone by. like you said you probably have to do it when its still new. i have a heat gun but i am afraid i would probably melt the visor with a heat gun lolSo, I couldn't stand looking at the white/yellow factory warning stickers on my sun visors driving down the road. Therefore, I decided to remove them and was actually surprised how easy it was. For those interested, just take a blow dryer, heat the sticker up (don't go too hot) and start pealing from the corner and once started, the whole sticker pealed off in one piece. It looks so much better, and while there is still a slight hint that the sticker was there, it's much cleaner looking. I can only assume the sticker came off that easily since my rig is new and the sticker hadn't been on the visor through a hot summer, or lengthy period of time.
Disclaimer: I am not responsible for any damage that may be caused doing this modification to your vehicle. Proceed at your own risk
What about goo gone professional strength its twice as strong and better ?will it work better ? it does on everything else i have used it on
