@SDhobbs - I bought extra. PM me your address and I will drop one into the mail for you.@SDhobbs I sourced one from Bolt Depot (see details below). I believe @CarbonSteel just sourced the same. We both have the Synergy TB clamp like Roky posted.
That is very kind of you sir! But looking at Metalcloak's specs I don't think that bolt will work, I did find one on Bolt Depot's site I think will do the trick.
The only concern I would have looking at specs would be length on bolt. MCs version is mounting through normal shock end. The Fox ATS mounting point is not as wide/thick as normal shock end, but I haven't messed with many of these...
What is the difference between the Bolt Depot bolt and https://www.synergymfg.com/fox-ts-and-ats-synergy-steering-stabilizer-clamp-adapter.html?
I thought the same so I ordered different length bolts just in case, hopefully one of them fits! I'll be sure to post my findings.
Nice setup with included spacer. SteerSmarts makes similar. The real issue comes down to cost in most cases when you include shipping. IIRC my bolt through BD was less than $5 shipped.
Yep; it appears that MC clamp is metric.
Did this ever get resolved? I impulse ordered the Fox ATS before i confirmed fitment with the MC bracket, and now I’m wondering what I need to make it work
I had my shop grind off the Metal Cloak bracket they welded on and installed the Synergy bolt. I didn't like the angle of the Metal Cloak bracket, it's too high, the Synergy bolt keep the steering stabilizer level.
I believe both the stud and the TR side bolt are 1/2", so you'll need to drill out one of the two regardless. I'd use a sharp bit and cutting fluid, I melted the OEM bushing and ended up just replacing it.
Thanks Matt for the advice, I know a steering stabilizer isn't that expensive but I hate to change something when it ain't broke... I think I will have to check those holes, because it has been replace last winter, and the one I have may have return to the old bolt. It appears the one I have now is P/N #68251580AG...
