Steer Smart Setup | Stabilizer ?

[Gdub]

We are idiots. We thought it was threaded in and not that it could slide right out lol. Thanks for the help

Just went thru it, there are far stupider people out there than u. What mount are you using?

Sponsored

 

[m3lover1]

Just went thru it, there are far stupider people out there than u. What mount are you using?

The steersmarts one for tie rod side and metalcloak relocation bracket on trackbar end side. I had that when I had my lift installed to relocate the stock stabilizer

 

[Gdub]

The steersmarts one for tie rod side and metalcloak relocation bracket on trackbar end side. I had that when I had my lift installed to relocate the stock stabilizer

verify the stabilizer fits on the metal cloak mount. The steer smarts mount on the trackbar side was to narrow for my fox ats and had to change to the synergy one.

 

[m3lover1]

verify the stabilizer fits on the metal cloak mount. The steer smarts mount on the trackbar side was to narrow for my fox ats and had to change to the synergy one.

It fit perfectly on mine. Btw did you reuse the fat rubber washer that was used on the original bolt from fox?

 

[Gdub]

It fit perfectly on mine. Btw did you reuse the fat rubber washer that was used on the original bolt from fox?

yeah. I used a rubber washer between bolt and stabilizer and stabilizer and mount.

 

[m3lover1]

yeah. I used a rubber washer between bolt and stabilizer and stabilizer and mount.

Awesome thanks

 

[m3lover1]

Those that have the Fox TS Stabilizer just curious any rubbing between that and the drag link passenger side adjuster sleeve?

 

[Roky]

Those that have the Fox TS Stabilizer just curious any rubbing between that and the drag link passenger side adjuster sleeve?

You might try a synergy track bar/stabilizer bolt, the mc bracket sets the stabilizer a further forward.

 

[m3lover1]

You might try a synergy track bar/stabilizer bolt, the mc bracket sets the stabilizer a further forward.

Ahhhh interesting. Thanks for the insight.

 

[Roky]

Ahhhh interesting. Thanks for the insight.

Here’s full turn to lock drivers side, and pic of location.......

 

[m3lover1]

Here’s full turn to lock drivers side, and pic of location.......

Suh-weet Roky!!! Thanks a bunch! Ordered it!

 

[Roky]

Suh-weet Roky!!! Thanks a bunch! Ordered it!

No problem

 

[m3lover1]

@Roky and @Gdub , does your stabilizer sit flat with the yeti tie rod using Synergy's bolt? Mine is tilted in its natural position after installing the bolt. I could force it to sit straight with force, but atm I have it in its natural position. Picture shows it's tilted towards the diff side.

 

[Gdub]

@Roky and @Gdub , does your stabilizer sit flat with the yeti tie rod using Synergy's bolt? Mine is tilted in its natural position after installing the bolt. I could force it to sit straight with force, but atm I have it in its natural position. Picture shows it's tilted towards the diff side.

mine sits flat.

 

[Roky]

@Roky and @Gdub , does your stabilizer sit flat with the yeti tie rod using Synergy's bolt? Mine is tilted in its natural position after installing the bolt. I could force it to sit straight with force, but atm I have it in its natural position. Picture shows it's tilted towards the diff side.

Here’s mine, But it’s on a synergy tie rod might be slightly different than the yeti. I would let it sit like it wants to without forcing as long as it’s out of the way when flexing.

Sponsored