AndySpill
Well-Known Member
- First Name
- Andy
- Joined
- Oct 24, 2023
- Threads
- 71
- Messages
- 1,654
- Reaction score
- 1,270
- Location
- Pittsburgh
- Vehicle(s)
- 2018 JL Sahara
- Thread starter
- #1
I upgraded PCs recently and using the cable that came with my Tazer JL today I was unable to connect to the Z Automotive Programming Utility (ZPU) from this new PC.
I knew it wasn't the cable or Tazer as such communication was available from my old PC.
It turns out that I needed to repair the ZPU FTDI software driver on the new PC, as per Z Automotive support, which can be downloaded at their suggestion from https://ftdichip.com/drivers/vcp-drivers/
I just wanted to put that out there with a bunch of search tags in case anybody else has the same issue.
I knew it wasn't the cable or Tazer as such communication was available from my old PC.
It turns out that I needed to repair the ZPU FTDI software driver on the new PC, as per Z Automotive support, which can be downloaded at their suggestion from https://ftdichip.com/drivers/vcp-drivers/
I just wanted to put that out there with a bunch of search tags in case anybody else has the same issue.
Sponsored
