Falcon Nexus Steering Stabilizer Relation?

[4x4inthe6]

Thats a good idea, i'll do that shortly. Thanks!

Sponsored

 

[thundermuffin]

Part number 99-01-01-158
This is for a 1 5/8 tie rod. I think they also have a smaller one. $22 for the part.

I'm using this with a steer smarts steering system.

Thanks for this! I'm about to install new ARB diff covers and an MC FAD skid, and needed something to relocate my Falcon 2.2 SS for clearance.

One thing to note - Teraflex has upped the price to 54.99 for 1 5/8" clamp (44.99 for the 1 1/2" clamp). Planning to use the MC SS relocation bracket on the axle side.

 

[Monarch490]

I had a 3.5 lift. I now have a 4 inch lift but all the products where installed prior to the 4 inch. What bushing do you need to pull? I removed my old draglink with a tierod puller.

how much bump stop did you have with the 3.5” lift?

 

[Gangplank]

Is anyone running the Teraflex Nexus EF 2.1 or 2.2 with the MetalCloak axel side bracket?

I already have the MC bracket installed and want to use the EF 2.1 but I’m not sure that the angle of the MC bracket being higher will work with the teraflex nexus tie rod clamp.

Or is there a way to mount the MetalCloak billet tie rod clamp on the Teraflex Nexus steering stabilizer body? The MC billet clamp has the angle built in.

 

[Roky]

Is anyone running the Teraflex Nexus EF 2.1 or 2.2 with the MetalCloak axel side bracket?

I already have the MC bracket installed and want to use the EF 2.1 but I’m not sure that the angle of the MC bracket being higher will work with the teraflex nexus tie rod clamp.

Or is there a way to mount the MetalCloak billet tie rod clamp on the Teraflex Nexus steering stabilizer body? The MC billet clamp has the angle built in.

The MC tie rod clamp is designed for a closed end stabilizer, not a through shaft, you could probably hack it somehow, but I would just spend the 30.00 on a track bar bolt ( Synergy or Fox) and leave the stabilizer alone on the tie rod side….
.

It

Sponsored