Baja Designs LP6 installed

[Fish]

Are those lp6’s or 9’s?

They are 9's big boys.

Sponsored

 

[AndrewS85]

Not to derail this thread but does anyone have pics of lp9’s on the factory steel bumper?

 

[Fish]

Not to derail this thread but does anyone have pics of lp9’s on the factory steel bumper?

 

[Deleted member 102807]

I used the BD mount from their plastic bumper kit. Very sturdy. Plenty of room around the recovery point.

I liked yours so much, I contacted BD about these brackets. They were awesome in being able to sell me a ‘kit’ of the plastic bumper brackets. Absolutely love this look, although it has precluded me from running a crash bar (or at least the two I had tried). I am going to document this install in the DIY section…. Simple install, but pain in the ass with a winch mounted lol…

BD, fwiw, this kit should be a product on the website and an option when you buy a pair of the LP6’s. At least that’s my 2 cents.

 

[nkyjeep]

I liked yours so much, I contacted BD about these brackets. They were awesome in being able to sell me a ‘kit’ of the plastic bumper brackets. Absolutely love this look, although it has precluded me from running a crash bar (or at least the two I had tried). I am going to document this install in the DIY section…. Simple install, but pain in the ass with a winch mounted lol…

BD, fwiw, this kit should be a product on the website and an option when you buy a pair of the LP6’s. At least that’s my 2 cents.

Did they give you a part number or a name for the brackets??cause I like that look as well

 

[Deleted member 102807]

Did they give you a part number or a name for the brackets??cause I like that look as well

Since these brackets were part of a combo kit for the LP6’s on a factory PLASTIC bumper, there isn’t a part number, although I have suggested they offer it. Given that and the amazing support from their tech support and Brian from BD on this forum, I can share the parts list. You will have to call for a price. I hope this helps.

FYI, don’t get thrown off by the descriptions like I did, when you see things like 30 inches. These also apparently work for some light bars. But 100% these parts work on the factory steel bumper (even with a winch installed) to offer a great mounting option for the LP6’s.

 

[AndrewS85]

Since these brackets were part of a combo kit for the LP6’s on a factory PLASTIC bumper, there isn’t a part number, although I have suggested they offer it. Given that and the amazing support from their tech support and Brian from BD on this forum, I can share the parts list. You will have to call for a price. I hope this helps.

FYI, don’t get thrown off by the descriptions like I did, when you see things like 30 inches. These also apparently work for some light bars. But 100% these parts work on the factory steel bumper (even with a winch installed) to offer a great mounting option for the LP6’s.

I like this look, what exactly do the lights mount too?

 

[Deleted member 102807]

I like this look, what exactly do the lights mount too?

On the BD site, under the combo kit there are instructions. (Fairly limited ones for the brackets.) But it really isn’t a hard install.

Here is my limited writeup of the install.

https://www.jlwranglerforums.com/fo...l-with-the-bd-plastic-bumper-brackets.141458/

 

[Biconia]

Thanks i had a chance to call and make a order and pickup from BD

#44-7640 must be 2 piece

here is the Breakdown and Price for the brack

 

[Zeddy]

Finally got the front bumper and SPod together. Just waiting for a reply from BD.

 

[c20040215]

Finally got the front bumper and SPod together. Just waiting for a reply from BD.

Do you have link to the bumper bezels and tow loops?

 

[Zeddy]

Those are the H&K offroad shackle tab kit. It ties right into the frame so I can flat tow from the factory rubicon bumper.

https://www.hkoffroad.com/collectio...-jt-shackle-tab-kit-for-stock-rubicon-bumpers

 

[UTME]

Thanks i had a chance to call and make a order and pickup from BD

#44-7640 must be 2 piece

here is the Breakdown and Price for the brack

Is this the kit with brackets?

https://www.bajadesigns.com/product...ngler-jl-note-w-oe-plastic-bumper/?vid=169645

Funny it says for plastic bumper but their photo shows a metal bumper. So it works for either.

 

[Biconia]

Is this the kit with brackets?

https://www.bajadesigns.com/product...ngler-jl-note-w-oe-plastic-bumper/?vid=169645

Funny it says for plastic bumper but their photo shows a metal bumper. So it works for either.

Yes haha

 

[Zeddy]

Well I don't have Lp6's but I do have a pair of 9's I even bought the S2 hitch light(not shown yet...)

Sponsored