ARB Twin Compressor Mount

[OffroadCalling77]

Next time allow a minute or two after the compressor is off and you start disconnecting the air hoses. I think that will give time for the pressures to equalize. I am planning to piece this system together on my own so I would really appreciate some feedback on this.

From the owner.

Sponsored

 

[engineXI]

I wanted to see if anyone else using this system usually sees variation between tires when filling up all 4 at the same time such as this.

I do. I had much more than this though. I had 1 tire stay at 23 PSI while the others were at 33 PSI. What I would do is just shut the compressor off for 1-2 min and it would equalize. Not sure if actual difference in the pressure or if the TPMS was off since it was always the same tire. Anyways, no need for worry on your part.

 

[Frankycardenas]

Does the innotive mount under the driver seat? I currently have my arb twin compressor just under the driver seat just laying around I’ve seen other mounts but I let for passenger seat I see their page says passenger seat as well

 

[smokeythecat]

I do. I had much more than this though. I had 1 tire stay at 23 PSI while the others were at 33 PSI. What I would do is just shut the compressor off for 1-2 min and it would equalize. Not sure if actual difference in the pressure or if the TPMS was off since it was always the same tire. Anyways, no need for worry on your part.

That isn't a real difference in air pressure between the tires. That would be close to impossible. It's just that the TPMS isn't updating evenly. I see this all the time.

 

[RivaDriver]

Hello from what I can tell there are no solutions currently available for the 392 to mount an ARB twin compressor. It looks like American adventure labs is working on some thing, but we really don’t know how long that will be. I wanted to see if I was correct in my research and there is nothing on the market at this time or did I miss something?

I didn't see the Epic-Mfg. Kraken tire inflation system referenced in this thread. I recently installed it in my 392 and love it.

https://epic-4wd.com/collections/epic-mfg/products/epic-kraken-tire-inflation-system-for-jeep-jl-jt

 

[Quick]

I didn't see the Epic-Mfg. Kraken tire inflation system referenced in this thread. I recently installed it in my 392 and love it.

https://epic-4wd.com/collections/epic-mfg/products/epic-kraken-tire-inflation-system-for-jeep-jl-jt

It’s unfortunate they copied the Innovate AT design.

I installed the Innovate version, and it’s great. Tony even has a new version of the brackets and fittings to run air chucks. I prefer this method for my setup.

 

[dblplay1212]

Here's his IG.
https://instagram.com/foolsgoldgladiator?utm_medium=copy_link

Wow

 

[dblplay1212]

I was so intrigued by this install and wanted to copy it, finally found other pictures and unfortunately the compressor is mounted outside the wrangler inside the spare carrier.

Do you remember where you saw more info on this?

 

[TX_Ovrlnd]

Do you remember where you saw more info on this?

I don't have a link, but it was a website featuring a custom build that was on display when FCA released some special packages and Mopar performance parts.

I found this image.

 

[ekim]

IMO, the compressor should be in the interior(not under the hood) and out of the way of water or kicks from feet.

This is the cleanest one I have seen-

This is supposed to be a Mopar kit or possibly one of the secret extras that will be coming on the 392 XR package.

Does this actually exist?

 

[ilmostro]

Does the innotive mount under the driver seat? I currently have my arb twin compressor just under the driver seat just laying around I’ve seen other mounts but I let for passenger seat I see their page says passenger seat as well

It mounts under the pax seat. I have it in my JT and love it. When my 392 gets here, it will get transferred over.

 

[SargeRubi3.0]

Any update on this Mount, is it passenger friendly ?

Sponsored