Goin2drt
Well-Known Member
- Thread starter
- #1
I always hard wire a radar detector in all my cars so the Wrangler was no different. Vehicle is a JLUR in case that matters as I tapped into wires at mirror.
Parts needed
Invisicord - http://www.invisicord.com/order.html
Windshield mount. Make sure you get the one right for your detector - https://www.ebay.com/itm/NEW-Perman...ield+mount&_from=R40&rt=nc&_trksid=m570.l1313
Right underneath the stem of the mirror there is a place to put in a screwdriver and pop the back plastic piece off. Pink wire top plug as seen in pics is the switched hot and black is negative. Plug in the invisicord into the plug. Replace the back plastic piece and run the wire out up the top opening
Done. Easy as that.
Parts needed
Invisicord - http://www.invisicord.com/order.html
Windshield mount. Make sure you get the one right for your detector - https://www.ebay.com/itm/NEW-Perman...ield+mount&_from=R40&rt=nc&_trksid=m570.l1313
Right underneath the stem of the mirror there is a place to put in a screwdriver and pop the back plastic piece off. Pink wire top plug as seen in pics is the switched hot and black is negative. Plug in the invisicord into the plug. Replace the back plastic piece and run the wire out up the top opening
Done. Easy as that.
Sponsored