RK 3.5” Adventure-X Pro Long Arm Install

[chevymitchell]

Rig: 2022 392XR

I’ve collected enough parts now to get started on the long arm.

I went with the 3.5” Rock Krawler
Adventure-X Pro, which is a 3 link rear, 4 link front long arm with billet lowers.

I’m using ADS triple bypass shocks, ADS bumps, and Artec aluminum skids.

The billet lowers are still on order. Should be here by next weekend or shortly after that.

Beadlocks were assembled last week. Raceline Ryno’s mated with 37” M/T Baja Boss’s.

This is going to be a pic dump for the install.

Today is disassembly day. Front axle, rear axle, driveshafts, gas tank, exhaust, and a few other things are coming out. Should be a fun time!

Link to suspension: https://rockkrawler.com/jlu-3-5-adventure-x-pro-no-limits-392-long-arm-system/

Link to instructions: https://rockkrawler.com/content/JL_ADV X__MIDARM (03-23).pdf

Link to shocks: https://www.adsshocks.com/products/direct_fit/direct_fit_race/parts/250-JLBPF-000

Link to bumps: https://www.adsshocks.com/products/race/bump_stops/parts/213-J000F-BMP

Link to wheels: https://racelinewheels.com/collections/offroad-beadlock-wheels/products/rt951bz-ryno-cast-beadlock

Sponsored

 

[Grayhound]

Are we going to get install video as well!?

 

[Rotsam]

Following.

Can’t wait to see this come together and even more interested in the performance once your done.

 

[Oletimer]

Rig: 2022 392XR

I’ve collected enough parts now to get started on the long arm.

I went with the 3.5” Rock Krawler
Adventure-X Pro, which is a 3 link rear, 4 link front long arm with billet lowers.

I’m using ADS triple bypass shocks, ADS bumps, and Artec aluminum skids.

The billet lowers are still on order. Should be here by next weekend or shortly after that.

Beadlocks were assembled last week. Raceline Ryno’s mated with 37” M/T Baja Boss’s.

This is going to be a pic dump for the install.

Today is disassembly day. Front axle, rear axle, driveshafts, gas tank, exhaust, and a few other things are coming out. Should be a fun time!

Link to suspension: https://rockkrawler.com/jlu-3-5-adventure-x-pro-no-limits-392-long-arm-system/

Link to instructions: https://rockkrawler.com/content/JL_ADV X__MIDARM (03-23).pdf

Link to shocks: https://www.adsshocks.com/products/direct_fit/direct_fit_race/parts/250-JLBPF-000

Link to bumps: https://www.adsshocks.com/products/race/bump_stops/parts/213-J000F-BMP

Link to wheels: https://racelinewheels.com/collections/offroad-beadlock-wheels/products/rt951bz-ryno-cast-beadlock

the things that young lady is learning will serve her well in life !
there won't be no blinker fluid changes for her !

 

[Roky]

Rig: 2022 392XR

I’ve collected enough parts now to get started on the long arm.

I went with the 3.5” Rock Krawler
Adventure-X Pro, which is a 3 link rear, 4 link front long arm with billet lowers.

I’m using ADS triple bypass shocks, ADS bumps, and Artec aluminum skids.

The billet lowers are still on order. Should be here by next weekend or shortly after that.

Beadlocks were assembled last week. Raceline Ryno’s mated with 37” M/T Baja Boss’s.

This is going to be a pic dump for the install.

Today is disassembly day. Front axle, rear axle, driveshafts, gas tank, exhaust, and a few other things are coming out. Should be a fun time!

Link to suspension: https://rockkrawler.com/jlu-3-5-adventure-x-pro-no-limits-392-long-arm-system/

Link to instructions: https://rockkrawler.com/content/JL_ADV X__MIDARM (03-23).pdf

Link to shocks: https://www.adsshocks.com/products/direct_fit/direct_fit_race/parts/250-JLBPF-000

Link to bumps: https://www.adsshocks.com/products/race/bump_stops/parts/213-J000F-BMP

Link to wheels: https://racelinewheels.com/collections/offroad-beadlock-wheels/products/rt951bz-ryno-cast-beadlock

Not that you need it, but social convention dictates that I offer my assistance should you come across something not in the instructions since I’ve done it already……………

 

[failsafe306]

This is amazing. I have the same kit in my garage waiting to be installed. Just honing my non-existent welding skills before I attempt it. Looking forward to your install.

 

[chevymitchell]

Are we going to get install video as well!?

I’ll grab a video later this afternoon. Not sure if it’ll be a comprehensive “install” video, but I can do some walk through type stuff where I just ramble endlessly. lol.

 

[chevymitchell]

the things that young lady is learning will serve her well in life !
there won't be no blinker fluid changes for her !

Exactly. She’s been my little helper around the garage since she was a tiny thing. Loves helping, too, which is the best thing in the world.

 

[chevymitchell]

Not that you need it, but social convention dictates that I offer my assistance should you come across something not in the instructions since I’ve done it already……………

You never know, man. Help is something I’m not afraid to ask for. Appreciate it.

 

[chevymitchell]

It has officially begun… lol.

 

[chevymitchell]

Gotta love them AWD launches. lol.

New shafts will go in anyway.

 

[Roky]

You never know, man. Help is something I’m not afraid to ask for. Appreciate it.

Absolutely man, lord knows you were a huge help when I did my gears…..

 

[chevymitchell]

Suspension and axles are out. Gas tank is next.

 

[chevymitchell]

Tank is out now. Good progress for the day so far. Exhaust is next.

 

[Rotsam]

So much shop envy. Love your setup and that really is a lot of progress for a single day.

Sponsored