gregg3g
Active Member
Perfect and ty! The “flashing” is easy to perform?Yes, that’s what I use.
Gregj
Sponsored
Perfect and ty! The “flashing” is easy to perform?Yes, that’s what I use.
Gregj
Sorry a couple more questions.It’s pretty easy, just go to miscellaneous settings>HVAC>dual zone ATC and hit go. When you get the successful message select restart all ECU’s and then do a few sleep cycles and that should do it.
Gregj
Perfect. Thanks so much!Sorry, turn the ignition on and let it all boot up, then off and open and close the door, wait for the dash to turn off. That’s one sleep cycle.
Gregj
I did it!!! So pumped. Thank you for all of your help!Sorry, turn the ignition on and let it all boot up, then off and open and close the door, wait for the dash to turn off. That’s one sleep cycle.
Gregj
Hey. I just read a bunch of your posts and replies bc I just upgraded from the 5" to the 7" radio and new Center Stack controls. Like you, everything works great but the compass. I am not sure if it matters but my vehicle never had satellite. It is not a huge deal to me but I would like the compass to work as long as it is not expensive and a big project. What is the minimum I need to get just my compass to work (I have no need for satellite radio) , the cable and antenna? Where will I have to place whatever I buy for it to pick up a directional signal? Thank you.So today at work I was bored and ripped into the cowl and added the new antenna , after testing of course
it works , it was the ^@&$@#*} antenna
Why would it matter I don’t know
Thanks to all for the help and the genius @twa8000 !!
if u have my issue—- yep antenna
still boggles my mind I have an antenna but not the one I need lol
you will need the antennaHey. I just read a bunch of your posts and replies bc I just upgraded from the 5" to the 7" radio and new Center Stack controls. Like you, everything works great but the compass. I am not sure if it matters but my vehicle never had satellite. It is not a huge deal to me but I would like the compass to work as long as it is not expensive and a big project. What is the minimum I need to get just my compass to work (I have no need for satellite radio) , the cable and antenna? Where will I have to place whatever I buy for it to pick up a directional signal? Thank you.
Thank you. U don’t think just the antenna up under the dash would be enough to get the compass signal?..you will need the antenna
you can purchase the mopar one but there is no long cable with it - you would have to purchase the extension then put it where you want it - the cowl is a great location
https://www.mymoparparts.com/oem-parts/mopar-satellite-antenna-68293949aa
the one i purchased from nismopar came with the cable , its a bit more but works great !!
you can then run the cable to the original location if you want to remove alot of covers , or you can do like i did and slap it in the cowl cover ! fast easy and no worries
https://nismopar.com/jeep-wrangler-jl-sirius-xm-gps-and-compass-antenna-kit
That's funny bc that is the exact one I had in my cart. I'll give it a go. Ty!it may work you can alllllways try and if no signal then u can purchase a cable . give it a shot it cant hurt to try - u can even try ebay for a used sat antenna if u want . save some cash
https://www.ebay.com/itm/294785446041?hash=item44a294f099:g:fd8AAOSw6dVh-A4f&amdata=enc:AQAIAAAA4Nm8wnjz1opAGYsh+k21OIEIt+RmnRsI7XgPCTdbzThqO519jYxNzPhTrgfZy6k1DHjCG27Za0murcgdZJSFlmr1giHW5Aa0bE02shN6ZSRHGNdWfiU4V2mUFWr5fr4rEXV2DZ7XKquPhGXcy1HMc84CtYz8Tm/7OXNO0X4xHPvgFMNpOeZ0zcppx74xknFamnsQoChxHIlJ3Ey14VTI646ata4ZomTXlp6AvNCzMIryhWrjvh+Owl2voTMYk98HPxZiLIajGDI0QZ32G57luRcRGmMmvNnyPlS1a0Zxgji1|tkp:Bk9SR8bZwtP8Yg
And check this thread for a great place to mount itThat's funny bc that is the exact one I had in my cart. I'll give it a go. Ty!