Sponsored

How do I route wire to the passenger side?

roy2120

Active Member
First Name
Roy
Joined
Jan 18, 2021
Threads
7
Messages
26
Reaction score
6
Location
South Florida
Vehicle(s)
2020 Wrangler Sahara
As the title states I have a question about wire routing through the rubber grommet on the driver side. I got my cb antenna through that grommet and down to the pedals, but I want the wire to come through to the passenger side footwell. Anyone know how to make this happen?
Sponsored

 

JRostek

Well-Known Member
Joined
Nov 11, 2020
Threads
3
Messages
68
Reaction score
47
Location
Orlando, FL
Vehicle(s)
2020 JLUR
If the wire is already inside by the pedals, why not just route it between the foot wells?

there’s a gap that you can use. Easier to see if you remove the carpet. You can use fish tape or a metal coat hanger to go to the passenger side and then pull the cable
 
OP
OP
roy2120

roy2120

Active Member
First Name
Roy
Joined
Jan 18, 2021
Threads
7
Messages
26
Reaction score
6
Location
South Florida
Vehicle(s)
2020 Wrangler Sahara
If the wire is already inside by the pedals, why not just route it between the foot wells?

there’s a gap that you can use. Easier to see if you remove the carpet. You can use fish tape or a metal coat hanger to go to the passenger side and then pull the cable
Thanks for the reply! Do you think you can send me a picture of this area? I’ll pull the carpets tomorrow morning and see.
 

20-Willys

Well-Known Member
Joined
Sep 20, 2020
Threads
5
Messages
250
Reaction score
186
Location
New England
Vehicle(s)
2020 JLU Willys
There is a grommet just above the wiring harness that runs through the firewall on the passenger footwell. If you search around you can find a picture of it. You'll have to use something like a plastic snake to poke through it as its closed off.

Be careful not to poke around to go through near the harness without knowing exactly where you are. Many have stabbed into that harness damaging the wires. Some have actually cut through them.
 

Sponsored

JRostek

Well-Known Member
Joined
Nov 11, 2020
Threads
3
Messages
68
Reaction score
47
Location
Orlando, FL
Vehicle(s)
2020 JLUR
Here ya go. When you pull the carpet back you won’t have the wire from the floor like the picture.

Make sure you pull the carpet on the passenger side as well. With the passenger side carpet pulled back, you can route the cable a few places depending on where you put the cb

Jeep Wrangler JL How do I route wire to the passenger side? 358864ED-C2CB-47CF-8DA6-3B481F91F9CE
 
OP
OP
roy2120

roy2120

Active Member
First Name
Roy
Joined
Jan 18, 2021
Threads
7
Messages
26
Reaction score
6
Location
South Florida
Vehicle(s)
2020 Wrangler Sahara
Here ya go. When you pull the carpet back you won’t have the wire from the floor like the picture.

Make sure you pull the carpet on the passenger side as well. With the passenger side carpet pulled back, you can route the cable a few places depending on where you put the cb

358864ED-C2CB-47CF-8DA6-3B481F91F9CE.jpeg
Thank you!
Sponsored

 
 







Top