wiring

I am adding a stereo amp in my 2024 Wrangler Sahara 4xE and wanted to make the wiring as clean, professional, unnoticeable, & simple as possible. The cleanest way is to use a fuse in the power distribution block (fuse box) just behind the 12v battery, under the hood. While there are several...

just bought two rubicon axels and a sway bar, want to put them into my current sport and keep everything as stock as possible. So I bought the OEM locker and sway bar panel trying to figure out the wiring, but it only got 3 cables behind it? How does 3 cables controls so many buttons?? and also...

New to the forums and first time Jeep owner. Purchased a new 2024 JLU Rubicon at the end of last year and just installed some Boost Auto mirrors with spot lights, reverse lights, marker lights, and sequential turn signals. Wire taps were provided with the mirrors to attach everything. I'm not...

I'm working on a lighting project, and I see these clips that snap into place. I've pulled, squeezed, and pushed them with and without a trim tool. Please help. I've attached some photos below to specify

Hello all! I am swapping 2019 Rubicon axles into my sport that I got from an engine fire jeep. The locker plug and internal connector was damaged-see pics. I have purchased the external wire and the female to female plug already that goes into the housing. I just need to find the correct plug...

Jeep Wrangler 2018 JLU 2.0 Turbo So my issue has been that my jeep would overheat when I’m idling or driving constantly at a low speed. My temporary fix was to rev my RPMs 3k + for a few secs and the temperature would go back down. I changed out all 4 spark plugs, slot 1 and 4 Ignition coils...

Hello My rubicon 2.0 liter 2020 jlu came from factory with the led package but the O rings doesnt work - when i chick the wiring on the head lights i see just 3 wires on the adapter and not 4 as it should , i bought from amazon a fuse adapter and awg 20 to wire it up , how can i do it a safe...

I was recently looking over the wiring harness on my 2 door 2021 JL Sport, which does not come with power windows, locks, or mirrors. Does this wiring harness have any ability to support any of those add ons? Mainly locks and mirrors - I don't care about power windows as a priority. Would...

Can someone tell me what the two connectors that are still connected go to? These are the wires inside the tailgate when you remove the plastic panel. I have searched the googles but can't seem to figure it out. The black one is the smaller of the two black ones (only 2 wires) and the grey one...

Hello all, I apologize if this has been answered and if so please point me in the right direction, but I can't find an answer to my question. I have a 2021 Sport S JL with a non-premium sound system and 7" head unit. I wanted to upgrade the sound system to the factory premium system. I found...

I recently opened up the soundbar in my ‘18 Sahara JLU base 7” system to fin no sound on the driver’s side. No issues on the passenger side. I replaced speakers in the working side without issue. I pulled the plastic to get to the soundbar electrical connection. It was tight. The balance/fader...

I have several projects I intend to work on over the next few weeks and some of them involve wiring in some capacity. After doing some reading/watching of various threads and YouTube videos on the subject it is all kind of making my head spin. While I am a fairly intelligent person (with a...

Not sure if anyone has experience here but I have a pair of Baja Squadron Sport Fog lights to go with a new Fab Fours aftermarket bumper. I want to use the existing fog log switch in my JLU Sport but the only way I have seen this done is removing the old fog light wiring and splicing the cables...

4x4 sPOD Hey Everyone, Our in-house sister company 4x4 sPOD brings the best alternative option to any AUX switch setup on the market with a fully integrated Canbus system for your accessories for anything with a battery, 12 or 24 volts. They have been the leading Switch module developer since...

I'm lost. I got a light in the mail today and don't want to use the light switch that came with it. I want to use my one of my aux switches that are installed. It's the oracle skid plate with led lights. I went on YouTube and they use the switch that comes with it. My question for the group is...

As the title states I have a question about wire routing through the rubber grommet on the driver side. I got my cb antenna through that grommet and down to the pedals, but I want the wire to come through to the passenger side footwell. Anyone know how to make this happen?

Hey All, I was looking behind the steering wheel kick panel in plans of routing cables through the firewall, and I stumbled upon a random plug in the wiring harness that doesn't have anything connected to it. The plug only has about 2-3" of length before it is connected to the wiring harness...

So I have a VoSwitch Jl 100 with the 8 button panel set up on my dash. I have the KC slimlite led lights and I wanted to swore them up, I believe I only need to use the red and black wire and I can cut away the relay and the other yellow wires since I won’t be using the supplied button from KC...

I am a newbie with wiring and electric components but I have the RC MLC-6 for my JLU and a pair of RC black series pod lights for the cowl. Says the lights are 60 watts, I’m questioning if I can put both positive together in one terminal, same with negative. Also how much can this MLC-6 handle...

Wondering what folks out there have done to organize their Aux Wiring under the hood (behind battery)? Right now I have tidied everything up but would love to know if there is some sort of box or just better organization than connecting the wires together and grounding on one or two...