3.0 MODS - Show em off

[Jp03]

New here, but thought I’d show before, during, and and getting there at 6 months old.

Sponsored

 

[Deleted member 59498]

New here, but thought I’d show before, during, and and getting there at 6 months old.

Very nice! Second time I have seen those wheels and my wallet was wiggling in my pocket!

Are they Mickey Thompson?

Think they would look great on Sting Gray.

 

[Jp03]

Very nice! Second time I have seen those wheels and my wallet was wiggling in my pocket!

Are they Mickey Thompson?

Think they would look great on Sting Gray.

Thanks! BFGoodrich ko2’s on 17” pro comp 69 series wheels.

 

[JL Diesel]

Very nice! Second time I have seen those wheels and my wallet was wiggling in my pocket!

Are they Mickey Thompson?

Think they would look great on Sting Gray.

Agreed!

 

[Deleted member 59498]

I knew there was one here!

 

[OnlyOne]

How did you get around the window washer fluid container? Also did you install rear liners as well?

I removed the rear liners on my 2021 3.0 Willys Sport. Now exposed is a relay on the driver side that has something to do with the engine, and on the passenger side, the diesel evap canister is exposed.

I'm trying to figure out best options for keeping those clean.
I was looking at the Rough Country rear fender liners and they specifically say on their website, they're not for the 3.0 Diesels.

Any ideas???

These are great.
https://paramount-automotive.com/i-...-jl-rear-plastic-inner-fender-liners-2pc.html

 

[Bohica]

Dude, I'd find a different place to park...or is that where you got the inspiration to put horns on your hood?

 

[Deleted User 38384]

@Bohica

Naww, the Devil horns I actually made September of 2020 for my Wife's Subaru Forester for Halloween. However I made them with Magnets knowing I would eventually put them on my JL after I ordered it. Lately I've been running with them on the hood, thanks to the Steel Rounds I installed a couple months ago.

You can see the steel round pretty clearly in the bottom right corner of the second photo.

I'm actually about to retire the Horns until Halloween and start a little more of an Americana theme going.

 

[Deleted User 38384]

These are great.
https://paramount-automotive.com/i-...-jl-rear-plastic-inner-fender-liners-2pc.html

Interesting...
So after doing a bit more research (this includes contacting Rough Country directly, to no avail), I was able to conclude the only difference between the 3.0/392 and the 3.6/2.0/4xe when it comes to fender liners is where the Wiper Fluid container is located on the front drivers side wheel well. Meaning only the front liners aren't a clean fit.
I'm about to buy the RC Rear fender liners tomorrow, and will upload a a photo showing the clean fitment.

On a side note, I'm about 70% certain you can put any Front Fender Liners on a 3.0/392 which you can on a 3.6/2.0/4xe with only slight modification to one anchor point at the top of wiper fluid container.

It's going to be quite a bit of time until I install Front Fender Liners, but definitely something worth looking into further. ?

 

[Deleted User 38384]

Put the Front bumper on the rear...

Involved a lot of cutting, but it was a pretty good fit at the end of the day. Looks really classy, like it belongs. At a later point I'm going to add some reflective panels where the fog lights used to be.

 

[OnlyOne]

Interesting...
So after doing a bit more research (this includes contacting Rough Country directly, to no avail), I was able to conclude the only difference between the 3.0/392 and the 3.6/2.0/4xe when it comes to fender liners is where the Wiper Fluid container is located on the front drivers side wheel well. Meaning only the front liners aren't a clean fit.
I'm about to buy the RC Rear fender liners tomorrow, and will upload a a photo showing the clean fitment.

On a side note, I'm about 70% certain you can put any Front Fender Liners on a 3.0/392 which you can on a 3.6/2.0/4xe with only slight modification to one anchor point at the top of wiper fluid container.

It's going to be quite a bit of time until I install Front Fender Liners, but definitely something worth looking into further. ?

The front liners work great. I used them on my diesel gladiator.

 

[RubiRob]

Was able to move a lot from my old Jeep that was totaled

 

[Brock9281]

Teraflex ST1 with 35s

 

[zouch]

Artec has liners specific for the EcoDiesel.

https://www.artecindustries.com/ecodiesel-inner-fenders
https://www.artecindustries.com/jlrif

How did you get around the window washer fluid container? Also did you install rear liners as well?

[snip]
I'm trying to figure out best options for keeping those clean.
I was looking at the Rough Country rear fender liners and they specifically say on their website, they're not for the 3.0 Diesels.

Any ideas???

 

[TX_Ovrlnd]

Artec has liners specific for the EcoDiesel.

https://www.artecindustries.com/ecodiesel-inner-fenders
https://www.artecindustries.com/jlrif

They’re about a week and a half from being able to ship them, but they are up on the site. I had messaged them about availability on their site after looking at them.

Sponsored