Tommy1569
Well-Known Member
I have this Ace Engineering Tire Delete as well. I will be installing it soon. I can not find Youtube video install for some reason!!
Sponsored
Where are your pics! I really just want to see your stock brake light solution.I purchased the Ace spare tire delete kit the other day. It looked like a promising design, clean, logo free, nice goemetric shape.
Upon receipt there were oh, a half dozen things wrong with the design.
1. Metal on metal on the edges. It reuses the factory bolts to attach to the tailgate. This is fine except it uses the tailgate to secure it along the edge of the plate. Over time and vibration this will wear thru the paint creating a literal tramp stamp of rust. Unacceptable. I had to go to the hardware store and buy spacers and washers to space it with a small gap. That was fun taking it off and on four times to make it even..
2. It ruins the angle of the rear view camera. It is pointed almost level to the ground, making the parking lines comical useless. This reduces the utility of having a rear view camera for parking or backing up close to cars or curbs.
3. Attaching the rear view camera is done with three tiny screws and nuts. The nuts are too large to fit the camera flange and must be installed facing out. All the photos show the screw heads outside, but without dremeling out my camera housing this is impossible. A simple bracket with tapped holes would have prevented this.
3. The supplied third brake light is a joke. I saw this and immediately decided not to use it. I drilled three holes in the top of the camera mount and pretty easily re-used the factory third brake light. This allowed not modifying the factory harness whatsoever. It even looks pretty cool up there. By drilling these holes I was prevented from returning the plate. My mistake.
4. The supplied licence plate light is a 2$ piece of garbage and shorted out immediately upon hooking up. It had an internal short that melted the super tiny thin ass impossible to strip and crimp wires.
5. Directions? who needs directions... None supplied or on any website. Used another manufacturers youtube video to figure out the wiring.
6. The stock wiring harness is pinched by the plate. Unless you spend an hour or two messing with spacers and washers to provide clearance....
Honestly if they supplied spacers, fixed the camera angle, and allowed you the option of reusing the third brake light, this would be the best plate on the market.
Other than that is its a nice product!
Sorry for the delay. I was busy writing bad reviews on yelp.Where are your pics! I really just want to see your stock brake light solution.
Hey!... Are you selling it for real?For sale: Slightly modified ACE spare tire delete with spacers so it doesnt ruin your paint and drilled to re use stock brake light.... 50$
Supposed to sell TJ half doors tomorrow ...Anybody use the Artec spare tire delete? Seems like the camera is mounted at the right angle and you can use the stock lights.
https://www.artecindustries.com/JL_Spare_Delete_PC
Np. Please oost pics when you get it on. I’m really considering this.Supposed to sell TJ half doors tomorrow ...
Will buy one as soon as I do ...
By far the best setup imo.
Thanks for the link!
I ordered this license plate kit and was wondering about how I'm going to have an extra license plate spot. Decided to go with the American flag blue/green line to place on it! Great idea! The kit I got is attached belowFinally redid and hid the wiring and got my new plate. Colored the nuts and screws with a sharpie marker, so that helped. Looks a little better I guess.
Just ordered mine today! Will be installing it ASAP when I get it!Anybody use the Artec spare tire delete? Seems like the camera is mounted at the right angle and you can use the stock lights.
https://www.artecindustries.com/JL_Spare_Delete_PC
My 35 wouldn't fit laying down with seats up. I wonder what the max weight the stock tie downs are rated for.... I tried standing it up but with two tie down straps it is still wobbly and I dont think it would last for serious wheeling.Installed mine today.
Bit frustrating without instructions. I like the brake light that comes with. Nice and bright. The wires are way too thin for the butt connectors they supply. I soldered mine then used heat shrink.
Didn’t use LED for lic plate. May at a later date. Left lic plate at OEM location. Installing muted gray and black flag plate. So didn’t want to light it.
No the real project begins. Installing spare in cargo area without totally loosing storage area. Thinking of false floor.
I’ve owned 3 wranglers and iconic as it is, I’ve never like the tire hanging off the back.
My 33 just fits flat. I’m thinking of also putting at an angle Baja style, it blocks rear view some but can always pop on rear camera. I have a few ideas ... I’ll share when done. May only take off road as most flats in town are in my driveway. Also run with a compressor and plug kit.My 35 wouldn't fit laying down with seats up. I wonder what the max weight the stock tie downs are rated for.... I tried standing it up but with two tie down straps it is still wobbly and I dont think it would last for serious wheeling.