klawrence3
Active Member
I have fog, driving pods with a spot barwhat led cubes did you install and are they driving or flood ?
Sponsored
I have fog, driving pods with a spot barwhat led cubes did you install and are they driving or flood ?
Thanks! The bar is rough country and the pods a rigid.Not to keep being a bother but could you tell me what brand of lights you have and you have a sharp looking ride there
I did the front by myself. Took a few hours. Would be easier with some extra hands.That’s what I need to hear front and back full size ordered for mine, how difficult was the installation?
20” but you have the flip the mounting brackets in instead of outWhat size light bars are across the top of these
so as far as the bolts not lining up. I did have a very minimal issue with alignment. I really think this was partially my error because I was rushing to get it on and I was doing it by myself. Ultimately I got all the bolts lined up and tightened down. If you get all the bolts started then tighten them down a little at a time then you shouldn’t have a problem.Hey All,
I’ve had my finger on the trigger on this bumper for months now (even spoken briefly to Jay1941 In passing about the bumper)
I’m about to pull the trigger on the full width version.
my questions are based a the lil research I’ve done seems some ppl have claimed that bolt points don’t exactly line up!? Is this true? If so any pointers anyone could share to give me a heads up.
Also for fog lights (I know the stocks don’t go with this bumper) any recommendations of which to go with? Also are they plug and play with the stock wired hardware?
much appreciated for anyone’s time and help/advice on this.
TIA
Awesome.so as far as the bolts not lining up. I did have a very minimal issue with alignment. I really think this was partially my error because I was rushing to get it on and I was doing it by myself. Ultimately I got all the bolts lined up and tightened down. If you get all the bolts started then tighten them down a little at a time then you shouldn’t have a problem.
so I wouldn’t say plug and play but I zip tied and taped up the connected to the frame. I wired the rigid fog lights to the factory wires so they function just like the factory fogs. I would recommend getting a sae fog if that’s what you are looking for. They have a nice cut off and won’t blind others.
You can get the regular pod lights or the flush mount ones. With the regular pods you will have more room to make adjustments. The bumper will come with the hardware to do either.
my light bar and pod driving lights are wired to come on with the high beams but I can also turn them off for inspections.
The flush lights will mount just fine. I already had the fog lights so I used them. I have looked at flush also.Awesome.
Thanks for the response, you’ve provided some good and much need info
edit: As for the lights…yea I’m looking more for the flush mounted ones…..although the ones you have are nice also