RABBIHOMESLICE
Member
- First Name
- Paul
- Joined
- Mar 9, 2018
- Threads
- 0
- Messages
- 15
- Reaction score
- 0
- Location
- Houston, Texas
- Vehicle(s)
- 2016 Jeep Sahara, 2018 Rubicon JL
Has anyone tried to add the rear cup holder yet?
Sponsored
I'm not even sure how you would acquire them.Has anyone tried to add the rear cup holder yet?
My Parts guy is checking into itHas anyone tried to add the rear cup holder yet?
What the ????So I went to the international auto show today and found something pretty interesting in their Sahara...![]()
They probably grabbed one built with cloth and then just switched the seats ?!So I went to the international auto show today and found something pretty interesting in their Sahara...![]()
GRRRRRSo I went to the international auto show today and found something pretty interesting in their Sahara...![]()
Well gives me some hope that it can be addedSo I went to the international auto show today and found something pretty interesting in their Sahara...![]()
6BN67TX7AB has been replaced by 6BN67TX7AC. Before anyone asks I haven't installed it, was just searching for more definitive info while waiting for my jeep and found out the part number had been updated.Part number is either:
6BN67TX7AB
6KM06TX7AB
(I would link but it the link redirects you to a page "no part found")
Mopar.com -> Store -> Parts -> Shop Now (popup window) -> Select Your Vehicle -> Jeep -> All New Wrangler -> Drop down menu on left that says "Jeep Accessories" click "Jeep Parts" -> Load More Categories (at the bottom) -> Interior Trim -> Drop down at the top-ish right that says "All" select "Consoles" -> Show next 12 of 28 items (at the bottom) and then look for "Floor Console - CONSOLE, Floor"
There's two items one after another as listed above
its #12 in the diagrams
Not too sure which part number is the one with the cupholders since the #12 points to both but my guess is with 6BN67TX7AB because it's more expensive at $53.49 compared to the other at $29.20
![]()
I have a feeling they did that on purpose for the auto show because of what people were saying about the useless trays. I’m pretty confident future Sahara’s will have both cup holdersWell gives me some hope that it can be addedSo I went to the international auto show today and found something pretty interesting in their Sahara...![]()
So do you believe this part attaches over the top of the existing tray? Or will the tray have to be removed?6BN67TX7AB has been replaced by 6BN67TX7AC. Before anyone asks I haven't installed it, was just searching for more definitive info while waiting for my jeep and found out the part number had been updated.
Remove and replaceSo do you believe this part attaches over the top of the existing tray? Or will the tray have to be removed?
What JEEPJL said.So do you believe this part attaches over the top of the existing tray? Or will the tray have to be removed?