303rider
Well-Known Member
- First Name
- Soleil
- Joined
- Feb 19, 2019
- Threads
- 27
- Messages
- 152
- Reaction score
- 76
- Location
- Denver, CO
- Vehicle(s)
- 2018 Jeep Wrangler Rubicon JLU
- Vehicle Showcase
- 1
- Thread starter
- #1
Over the weekend I installed the Mopar AUX switch kit. I followed the directions from Mopar as well as referencing the videos by CJoffroad and Quadratec.
I have the Tazer JL Mini equipped. I set Tazer setting for AUX to ON from OFF.
In the settings menu I now see AUX switches and I am able to modify the settings per AUX switch.
Now the major issue. They are not working!
The switches do not light up when I press the button on any AUX Switch.
If there are no accessories hooked up does you AUX still light up when you push the button?
I mounted an ARB Twin in the cargo area and ran cables to the battery and AUX 4.
Now I don't know if the AUX switches are not working or whether I did not wire the ARB correctly.
Well as such as long as the ARB was wired correctly, I do have something connected to AUX 4 and as stated above nothing turns on.
Any help is much appreciated.
I have the Tazer JL Mini equipped. I set Tazer setting for AUX to ON from OFF.
In the settings menu I now see AUX switches and I am able to modify the settings per AUX switch.
Now the major issue. They are not working!
The switches do not light up when I press the button on any AUX Switch.
If there are no accessories hooked up does you AUX still light up when you push the button?
I mounted an ARB Twin in the cargo area and ran cables to the battery and AUX 4.
Now I don't know if the AUX switches are not working or whether I did not wire the ARB correctly.
Well as such as long as the ARB was wired correctly, I do have something connected to AUX 4 and as stated above nothing turns on.
Any help is much appreciated.
Sponsored