chevymitchell
Well-Known Member
- First Name
- Shawn
- Joined
- Feb 18, 2018
- Threads
- 94
- Messages
- 4,269
- Reaction score
- 10,231
- Location
- K-ville, NC
- Vehicle(s)
- 2019 JLUR (Pain Train), 2022 2500 AT4
- Occupation
- Avi Engineer
- Thread starter
- #376
It’s all good man. When you take the cover off again, cut them threads once more and it’ll be like new.Just finished potting my sensors. I agree with others, it seems to engage almost instantly. Before it would blink a bit and then engage.
I did run into an issue but it was my own doing. I ended up striping a diff cover bolt so did my best with the rethread but it didn’t work all that well for me. The bolt is in and it’s tight but it didn’t seat all the way. I’m leaving it that way for now as it is holding and didn’t leak. Just means in the future if I ever want to remove my cover, I’ll have to deal with it. Sucks but such is life I guess. Seems to be the luck I have.
Sponsored