Help with rockjock antirock

[Djhyper66]

When installing the arm .. I can’t get it get it installed level… does the bar need to be installed level as possible ?? Seem mine at a huge angle … any advice or tips … do I need to have this install on a huge lift???

Sponsored

 

[rkwfxd]

It’s better to have the end links too long than too short.

 

[TKL223/3]

Looks fine to me

 

[zouch]

have you got the minimum lift Rock Jock recommends?

the adjustable links come in different lengths, too; you could contact them to see what they says about you maybe needing a different length link.

 

[ssrgeoff]

Mine sat right around there maybe a little less of an angle. You can order shorter end links but I wouldn't say to go level as you don't want it to flip around in full droop. I came across a video awhile back that showed how to measure your down and up travel to find the sweet spot.

 

[Djhyper66]

I have a mopar lift … just all the video I see online the bar wasn’t as slanted .. but I guess it depends on the length of the end links and lift ..

 

[firedude]

The antirock arms should only be level at mid shock travel. Jeep needs to be in the middle of total shock travel then arms can be leveled. I had to trim a couple of mine. You also need to full droop it to make sure there is no chance of it flipping or reversing as mentioned above.

 

[word302]

Looks fine. You’re right around the sweet spot.

Sponsored