Doorless Mirrors?

[wired]

Thoughts?

I know this says for "doors off" driving, but either the description or the picture is off as that mount in the picture is to mount on the doors

Sponsored

 

[aug0211]

These just showed up on quadratec site. Anyone have experience with a mirror like this on previous Jeeps?

I’m betting these will be the top option. Great find.

 

[UrbanRogue]

I’m betting these will be the top option. Great find.

Yes. been waiting for this option

 

[ekimgnuj]

These just showed up on quadratec site. Anyone have experience with a mirror like this on previous Jeeps?

Thanks, I've been watching Quadratec and had not yet seen that one! It looks promising for sure.

 

[aug0211]

Thanks, I've been watching Quadratec and had not yet seen that one! It looks promising for sure.

Can't wait for someone to get these installed and report on the quality! Unfortunately, I don't even know when I'll receive my 2.0T at this point, so I'm a horrible candidate to give the first review, lol.

Has anyone ordered them yet?

 

[Dubeau9005]

Thoughts?

I just looked at the installation guide. Definitely meant for the doors, not doors off.

 

[Movingday]

I just looked at the installation guide. Definitely meant for the doors, not doors off.

That’s what it looked like to me also, thanks for confirming

 

[UrbanRogue]

Thanks, I've been watching Quadratec and had not yet seen that one! It looks promising for sure.

I had the rugged ridge rectangle ones for JKU. Kinda liked them over the circular ones. Hoping they come out with that type again.

 

[am1978]

I just looked at the installation guide. Definitely meant for the doors, not doors off.

These are probably for the tubular doors.

 

[am1978]

These are probably for the tubular doors.

On second look, the product description on that moparonlineparts.com States they are for doorless driving. I would hope mopar tubular doors come with the mirror shown although the descriptions for those don’t state as much.

 

[Movingday]

On second look, the product description on that moparonlineparts.com States they are for doorless driving. I would hope mopar tubular doors come with the mirror shown although the descriptions for those don’t state as much.

But the way it shows them attaching seems to be on the door

 

[bru22]

I am going to pre-order these.. Hopefully they come soon.
https://www.quadratec.com/p/lange-originals/coyote-mirror-pair-jeep-wrangler-jl

 

[ekimgnuj]

I had the rugged ridge rectangle ones for JKU. Kinda liked them over the circular ones. Hoping they come out with that type again.

Thanks, that's what I have, I am hoping they fit my JL, but they wobbled so badly they were barely useful.

 

[ekimgnuj]

Has anyone tried the Steinjager mirrors: https://steinjager.com/shop/index.php?route=product/product&product_id=43908

They look like the "poly insert" slides down over the hinge, which would make aligning them during each install much easier, I would think, maybe even require no adjustments (every other hinge mount I have tried, or even removable bracket mount, requires adjustment). Can't find any reviews, but a few comments for the JK version did seem to indicate the passenger side mirrors are blocked by the dashboard.

I would love to hear if anyone has tried them. Thanks!

 

[Dubeau9005]

Has anyone tried the Steinjager mirrors: https://steinjager.com/shop/index.php?route=product/product&product_id=43908

They look like the "poly insert" slides down over the hinge, which would make aligning them during each install much easier, I would think, maybe even require no adjustments (every other hinge mount I have tried, or even removable bracket mount, requires adjustment). Can't find any reviews, but a few comments for the JK version did seem to indicate the passenger side mirrors are blocked by the dashboard.

I would love to hear if anyone has tried them. Thanks!

I was thinking of building something like this. After looking at foot pegs that go on the bottom hinges and how they have a bracket that pushes up against the body so it doesn’t rotate, don’t think it would be hard to take a set of the hinge mirrors and weld a piece of metal onto them that would go to the inside of the door frame to prevent them from rotating from the wind. If I ever get my JL (was supposed to be delivered today), and I get a set of mirrors, will try it and post pics on here.

Sponsored