Another TPMS question

[CharlieVictor]

I'm sorry if this has been already covered to death, but the search function didn't lead me to what I'm looking for. I have a 2022 JLU that I recently rotated the tires on. The TPMS still shows the tires in their original positions, and I haven't figured out how to get it to learn the new positions. Is this something that I can do? If so, how? Thanks in advance!

Sponsored

 

[kah.mun.rah]

Drive it around the block a few times and it should update.

 

[CharlieVictor]

Thanks for the suggestions. The issue that I'm having is that the TPMS is registering pressures, but it has the tire locations wrong. It shows the pressures in the original positions, not where they are now.

 

[ColtSeevers]

Mine takes a couple miles to update. It will always show its last reading at start up then update as you drive. Its not instantaneous.

 

[DOOKEY]

Thanks for the suggestions. The issue that I'm having is that the TPMS is registering pressures, but it has the tire locations wrong. It shows the pressures in the original positions, not where they are now.

Just keep driving. They'll update. Sounds like an excuse to go for a cruise!

 

[RenegadeT]

I agree with everyone else...but you could also fill them all up/air them down to the same optimal pressure

 

[Goin2drt]

Lower the pressures 10 psi. Go drive around the block. Come back and fill up to door placard (37 psi) and then go drive again. They will relearn.

Sponsored