4xe Lift Kit?

[GATORB8]

So you installed them on top of the Mopar lift? Did the ride quality change?

I did it on the stock springs, but they go between the isolators and the frame mounts so they’d work the same on the mopar.

No discernible change in ride, they don’t effect spring rate.

Sponsored

 

[LJ_3M121318]

I did it on the stock springs, but they go between the isolators and the frame mounts so they’d work the same on the mopar.

No discernible change in ride, they don’t effect spring rate.

Do you have a link to the one you got?

 

[GATORB8]

Do you have a link to the one you got?

I used the 1.5 kit which is 2” front 1.5” rear.
https://teraflex.com/shop/suspensions/jl-4dr-1-5-performance-spacer-lift-kit-no-shocks.html

 

[GATORB8]

Ramped it today at Jeeptastic Park in NC. Good with the Bilstein 3-4.5s with removed LCA brake brackets and removed Parking brake bracket. Just gotta cut the ends off my RR HD front bumper, damn.

 

[TheRealChad]

Mopar is starting to hear from people now about Rubi’s not getting 2” of lift. Call 888-528-4364 option 4. Dave and Levee have open cases about this and Jeep calling. They told me someone would call me back and closed my case. ?‍

 

[kushil89]

Ramped it today at Jeeptastic Park in NC. Good with the Bilstein 3-4.5s with removed LCA brake brackets and removed Parking brake bracket. Just gotta cut the ends off my RR HD front bumper, damn.

I was about to get the Bilstein 5100s for my Sahara 4xe as well, to go with the Teraflex 2.5 spacer lift. Do you think I could do the 3 - 4.5" Bilsteins or just stick with the 2-3"?

 

[GATORB8]

I was about to get the Bilstein 5100s for my Sahara 4xe as well, to go with the Teraflex 2.5 spacer lift. Do you think I could do the 3 - 4.5" Bilsteins or just stick with the 2-3"?

As long as you have at least 2” of bump stop extension you should be good with the 3-4.5. I think you’ll need 3” of bump up front with the Sahara fenders with 35s

 

[HellaRubi]

Just thought, Stock JLRU has 7.7 from top of thee 33" time to the bottom on the fender. If I have 10" after the lift but that is with 35's. so the tire took up another inch. That would tell me the dealer raised it 3.5" above stock.. right?

Yes, I think that's right.

 

[installer88]

Changed my setup to a “proper” lift now. Accutune coilover setup with fox 2.0 shocks. I love how it drives on the road and it’s even better off road. I haven’t taken it up a ramp, but here is a screenshot from a video a buddy took of me off-roading.

 

[LJ_3M121318]

Changed my setup to a “proper” lift now. Accutune coilover setup with fox 2.0 shocks. I love how it drives on the road and it’s even better off road. I haven’t taken it up a ramp, but here is a screenshot from a video a buddy took of me off-roading.

That looks nice. So many questions.

Did you start with the mopar 2" lift, then took off everything and just left the Fox shocks on?

And what size is the lift?

 

[Foster174]

Do you have the link to these specific parts? This is the perfect size. I was look at 1.50 but too much.

Sorry for the late response, the
front spacer: https://teraflex.com/jl-jt-ecodiesel-1-coil-spring-spacer-adjustment-kit-front.html

for the rear: https://teraflex.com/jl-0-5-coil-spring-spacer-load-level-kit-rear.html

 

[installer88]

That looks nice. So many questions.

Did you start with the mopar 2" lift, then took off everything and just left the Fox shocks on?

And what size is the lift?

I started with a teraflex spacer lift. Mopar was not released when I lifted mine originally (mid April)

This is a full coilover system, it is adjustable between about 1.5” and 4” of lift. I have mine set to be a decent height in my mind.

 

[bcooper99]

I used the 1.5 kit which is 2” front 1.5” rear.
https://teraflex.com/shop/suspensions/jl-4dr-1-5-performance-spacer-lift-kit-no-shocks.html

Do you need an existing lift to do a spacer lift? Trying to see if I could put these on my Sahara 4xE without doing shocks or anything.

 

[GATORB8]

Do you need an existing lift to do a spacer lift? Trying to see if I could put these on my Sahara 4xE without doing shocks or anything.

No you don’t need an existing lift, you may get close to maxing out your shock extension on the stock shocks though.

What tires are you looking to run?

 

[sparky321977]

So I saw a 4xe Sahara with the mopar lift on yesterday and it looked pretty damn sick.... I am kicking myself as i ordered a 22 4xe sahara and i should of done Rubi but i thought my Bronco (day 5 reso holder) would be here this year. with the allocation at my dealer think i may be waiting till next year for my Wildtrax and may end up cancelling (noodling back and forth with that). point is I am thinking now that I want to have the dealership install the mopar lift as I hate riding stock. That keeps warranty in tack correct? also if wheel and tire combo takes a few weeks to come in will it be ok riding around on the 4xe black 20's and tires with the lift until i get them?

Sponsored