3.0 MODS - Show em off

[LotaBoot]

Well, I was a little bored yesterday, so I made these myself...made out of paracord. Matches my seats!

I actually had my daughter make me a set too! Also to match my seats (once I get them, along with the rest of the Jeep. Ha)

Sponsored

 

[LotaBoot]

Anyone figure out a place to mount the ARB Twin air compressor? I am thinking about making it portable in a case!

I plan on mounting mine in the tub in the back and plumbing to a 5 gal tank that I plan on mounting on one side of the cargo area.

 

[simsf1]

3 inch BDS lift with Fox shocks, 37" Toyos, 20" Black Rhino wheels, Warn Xeon 10-S, Warn Elite rear bumper with tire carrier, BDS Steering stabilizer with Fox shocks, Factor 55 ProLink, Rydonair 13 inch antenna, & 3.0 Diesel emblems.

Going to add Rigid Pod lights on the Cowl, retractable running boards, and possibly a roof rack.

I'm new to Jeeps. Huge car guy. Porsche nut. Appreciate all the knowledge and advice posted here. It has been extremely helpful. Complete novice though, so please go easy. Learning every day. I can't tell you how many nights I've stayed up past 3am on this site. Lol. Thanks again.

Btw. Last pic is at my place. Neighbor is not happy with his stock Rubicon. I told him to come here and catch the bug.

 

[Platinum7990]

3 inch BDS lift with Fox shocks, 37" Toyos, 20" Black Rhino wheels, Warn Xeon 10-S, Warn Elite rear bumper with tire carrier, BDS Steering stabilizer with Fox shocks, Factor 55 ProLink, Rydonair 13 inch antenna, & 3.0 Diesel emblems.

Going to add Rigid Pod lights on the Cowl, retractable running boards, and possibly a roof rack.

I'm new to Jeeps. Huge car guy. Porsche nut. Appreciate all the knowledge and advice posted here. It has been extremely helpful. Complete novice though, so please go easy. Learning every day. I can't tell you how many nights I've staying up past 3am on this sight. Lol. Thanks again.

Btw. Last pic is at my place. Neighbor is not happy with his stock Rubicon. I told him to come here and catch the bug.

Looks good! How do you like the BDS dual stabilizer? Did you see a difference? On my Ecodiesel the steering is much more stiff with the synergy shaft brace and stock stabilizer. Not sure if this will be overkill.

 

[simsf1]

Looks good! How do you like the BDS dual stabilizer? Did you see a difference? On my Ecodiesel the steering is much more stiff with the synergy shaft brace and stock stabilizer. Not sure if this will be overkill.

Thanks! I honestly have no idea. Drove her maybe 5 miles before sending to installer. He recommended, so I went with it.

 

[JLURD]

3 inch BDS lift with Fox shocks, 37" Toyos, 20" Black Rhino wheels, Warn Xeon 10-S, Warn Elite rear bumper with tire carrier, BDS Steering stabilizer with Fox shocks, Factor 55 ProLink, Rydonair 13 inch antenna, & 3.0 Diesel emblems.

Going to add Rigid Pod lights on the Cowl, retractable running boards, and possibly a roof rack.

I'm new to Jeeps. Huge car guy. Porsche nut. Appreciate all the knowledge and advice posted here. It has been extremely helpful. Complete novice though, so please go easy. Learning every day. I can't tell you how many nights I've stayed up past 3am on this site. Lol. Thanks again.

Btw. Last pic is at my place. Neighbor is not happy with his stock Rubicon. I told him to come here and catch the bug.

Is the CHMSL height-adjustable? I see all these pictures online of folks running it like 5” above a 35” tire. Still holding out for the AEV rear bumper and tire carrier but if they don’t go back to work any time soon, warn it is.

 

[Oilburner]

Okay pretty lame by comparison, but I got my 'black Moab' freak on today - it's a Shame you gotta go thru so much trouble just to make the Jeep look like it shouldda came from the factory

 

[bryan8379]

 

[kosinar]

I like the your compressor mount. What bracket is it mounted on? Did you wire it to auxiliary switch?

 

[Jludiesel334]

Went a different route with the diesel emblem on my wife’s Jeep. Also, wrapped the factory handles and made some headrest handles.

 

[Jludiesel334]

Made a hardtop lift. Wireless remote to winch. Mounted in attic with a door cut in the storage area. Powered by an atv battery. Topsy product sure made things easy!

 

[toolaide4fit]

So, decided I didn't want the ARB installed under the seat, (worried about the heat and noise) didn't want it mounted in the back showing, so I designed my own portable case, added a 1 gallon tank and pressure regulator and I am wiring it up today and will have battery clips so it is portable to use with other vehicles.

I have a son that has a race truck and drives it to the track and he may borrow it when he goes and I am not using it. I also build a system to inflate all my tires at the same time.

 

[Jludiesel334]

Just finished installing a PowerBass BTA8 powered tube. Pretty straightforward install thanks to the info on the forum.

 

[bryan8379]

I like the your compressor mount. What bracket is it mounted on? Did you wire it to auxiliary switch?

It's the JK Innovations mount/kit. I have it wired to the aux 4 switch

 

[toolaide4fit]

Installed this today! Garage Smart Jeep Top Hoist! it was an easy install and works great. As soon as the it stops raining and warms up again I will test it out!

Sponsored