Help me understand what bolts do you have to remove , to install the ace sliders.The bolt is an 18 mm head, I dont know but would guess that would translate to about a 3/8th or 1/2 inch standard bolt. I think 19mm is equivalent to a 3/4 which would be 1/2inch if that makes sense
I think the key is to get rid of those 6 rubber spacers. They are poor quality and the glue will rip the surface off, then the covers are loose again.I just popped mine off while the roof was off. I will get some glue and reattach them next time it is off.
This probably doesn't help much, but these days, a lot of the stuff that is "chrome" is also plastic...
I would not be surprised if this chome piece you are talking about is just a piece of chrome plated plastic covering an actual metal part that did the real work. I've seen that on some cars over the years.
Take a magnet and attempt to stick it to the piece in question. The actual working part of the piece is probably steel, so it should attach to it. With a layer of plastic, it will have a weaker attachment.
Ha! Almost makes me want to move to Alaska! But I’m not worried... this 95 degree weather, with 85% humidity, and about 1 inch of rain every afternoon around 4-5 won’t last forever!
Actually, Gary, technically we are still in full summer, so don’t rub it in please! LolCrazy hot in Colorado finally easing up. Still in the 80's but at least it's not frying the grass and helping the wildfires.
Was a perfect 54 degrees last night. Best sleep I've had in a while. I do love the Spring and Fall.
