What did you do TO your Jeep JL today?

[Kraty1]

Finally had a nice enough day in Chicagoland to put the soft top all the way down!

Sponsored

 

[Arterius2]

Asked dealer to apply TSB# S1819000003 and S1819000004 but with my own supplied Fox Racing ATS stabilizer and their updated track-bar.
End result? I’m just gonna close the books on this and calling it fixed.
On my way home, I went straight for a giant pothole at full speed, no death wobble, not even a wobble, very satisfied.
As for drift/steering wheel slack, the track bar appears to fix most of that, there is about half an inch of play but over all very smooth and consistent. Seems to be more resistant when turning the steering wheel but that’s probably due to the stabilizer.
Overall very happy and glad to not have to deal with issue again. (Hopeful)

 

[landshark99]

Switched out the stock Rubicon wheels and KO2 tires for some 315/70/17 KM3s on some new rims. the lift is next week

 

[Roky]

Asked dealer to apply TSB# S1819000003 and S1819000004 but with my own supplied Fox Racing ATS stabilizer and their updated track-bar.
End result? I’m just gonna close the books on this and calling it fixed.
On my way home, I went straight for a giant pothole at full speed, no death wobble, not even a wobble, very satisfied.
As for drift/steering wheel slack, the track bar appears to fix most of that, there is about half an inch of play but over all very smooth and consistent. Seems to be more resistant when turning the steering wheel but that’s probably due to the stabilizer.
Overall very happy and glad to not have to deal with issue again. (Hopeful)

Is the new updated track bar bigger, heavier, or adjustable?? Was wondering how they changed it. I noticed the factory one is super light when I replaced mine with rk adjustable one.

 

[Arterius2]

Is the new updated track bar bigger, heavier, or adjustable?? Was wondering how they changed it. I noticed the factory one is super light when I replaced mine with rk adjustable one.

apparently with tighter bushings or something.

 

[bpdunsta]

Finally had a nice enough day in Chicagoland to put the soft top all the way down!

I picked up my Moab in March and this Chicagoland weather has been killing me. Last couple days have been gorgeous, now looking like another week of rain. Grrrr

 

[Hagie]

Got my Quadratec hood black out yesterday. Also got a stomach bug yesterday so waiting until this weekend to install. Should be fun with help from my 6 year old.

 

[4x4Funlover]

Quadratec aluminum engine and trans skid installed on my 2-door. The current 4 door plate will work on the 2 door if you make a hole for the fuel tank skid stud in the cross member or just cut off the stud like I did. I made a visit to Quadratec and worked with the engineers there. They have updated the site so that current skids say 4 door only and will update when they have the 2 door's ready (the hole for the 2 door's did not make it into production).

did lose a little ground clearance but the protection from this thing is better than the alternative these things are stout. I was talking was talking to Quadratec engineers, while developing the skids the engineers used a jack to lift the vehicle off the ground from multiple points plates and cross members.

 

[MacombRoger]

You just cost me more money. Why do I keep reading these forums

Plus $70 for the License. It adds up.

 

[MacombRoger]

Not a question for you, but does anyone know what the green and white plugs are for here behind the glove box. I haven't taken it apart to look myself, but anytime I see open "ports" I see opportunity.

 

[WhiteGold]

I got more mud than i care to all up around my whole front end.

 

[Arterius2]

Tested mine out today, you can definitely feel the resistance with the Fox ats . It feels real good super impressed. I didn’t think my steering was sloppy just thought my tires were tracking in the grooves with the stock stabilizer until today everything is nice and tight. I would highly recommend this stabilizer to JL owners and I’m running a heavy 37 on a 12 wide wheel .

Glad it worked out for you too! Cheers!

 

[jdthird]

A few weekends ago I got the hoist installed in the garage, so was able to get the hard top off and stored, and install the Bestop NX I purchased back in March... Then yesterday was the first day to get the doors off... Driving was weird without the side mirrors - not required here as long as the rearview mirror is unobstructed, but I still ordered a pair of ones that bolt somewhere under the window, since the ones that go into the hinge point seem to fold in for everyone... Waiting for those to ship now...

 

[brazos]

I got more mud than i care to all up around my whole front end.

You look a lot happier about that situation than I would be.

 

[MacJack]

Amazon
.50 OD x 25'
rubber
two types shown, I bought the solid, round tube type
cleaned out gap with compressed air and credit card
worked gasket in with plastic trim tool in the sun
started doing one fender then going around to the next 3
ended up going around 3-4 times as it kept going deeper (as it softened up and got flexible)
ultimately wedged in and looked like a factory gasket

Would you share the amazon link to the product. Thanks.

Sponsored