What did you do TO your Jeep JL today?

[Bingy]

Well, I did it again. This is my third time switching wheels. Went with the Mopar “Beadlocks” but these are without the Beadlocks. Asked DT to leave the rings off but they put them on. They might just stay there a bit now.

View attachment 122725

View attachment 122727

Very nice. Are those the 315 70 17 C rated KO2's? And what size lift?

Sponsored

 

[TTEChris]

Installed a set of @ROAM flat fenders, and black stick on grille inserts on my Wife's Sport. The stock sport fenders were really limiting her available shock uptravel. We need to order some front inner fender liners, and measure/install shorter bumpstops.

 

[Jo's Jeep]

There are sooooooo many things wrong with that video. Explains a lot.

 

[TrailTorque]

Installed a set of @ROAM flat fenders, and black stick on grille inserts on my Wife's Sport. The stock sport fenders were really limiting her available shock uptravel. We need to order some front inner fender liners, and measure/install shorter bumpstops.

Noooiiicceeee!!! I want them now! Need to get my ROAM Frame Mounted Steps/Sliders in first though @ROAM then we can talk flat fenders haha

Speaking of ‘Bump Stops’ funny video @ 00:35:

 

[jlsahara]

Very nice. Are those the 315 70 17 C rated KO2's? And what size lift?

Yes, it is those. Interested to see how the C rated feel compared to my previous 35x12.5 E rated Pro Comps.

I still have the same EVO 2.5 Boost with their Front Lower Adjustable Control Arms.

 

[SSBattalion]

Can't wait to get this on. Rock Krawler 2.5" X Factor Kit.

 

[JEEPJL]

Originally I thought I'd use fabric Velcro ties but they seemed to be limited to 10" in length at Harbor Freight (just slightly too short) and I wanted to just try this as a proof of concept to see if the carabiners, (i.e. grab handles) would stay in place.

My zip ties are very tight (I used plyers to get the final maximum tightness) and I don't think they will dig in, but switching to Velcro or coating the zip ties as you mention might be a good idea.

Here's the back passenger's seat one. The MOPAR one is still there as, as stated, I was only trying this as a proof of concept at first. The carabiners/grab handles stay where you last left them: up or down.

(As a premium member at Harbor Freight the 5" carabiners are actually only $0.99 during the Thanksgiving sale.)

Clever !

 

[Jo's Jeep]

Installed a set of KMC Beadlocks and 37" Yokohama G003's on @TankCustomsAlex 2dr JL. Now to decide on a lift
The Yokohama G003's have great road manners! Not much louder/stiffer than the factory KO2's.

Those will most likely be my tires when the time comes... Heard all good things about them.

 

[JEEPJL]

How do you know it’s overpriced for what it is? Did you ask the owner of that Jeep to hold his flashlight? Lol

It’s a $20 dollar flashlight that’s pretty solid. If I compare it materials wise to a surefire (I have plenty) and I assume surefires are expensive (again never had to pay for one) you would think you would be more interested. You stick with your 3 surefires and I’ll go buy 20 of these for what I’m sure are 1/10th the cost and “cute”.

I have one and Love it ....when it goes bad then we trade up

 

[BSw]

Installed the metal cloak game changer 3.5” lift with a set of falcon 3.3 shocks

 

[WhiteGold]

I added a new decal.
Finally, I’ve been debating this one for a long time.

Well "technically" I do have to manually shift from PARK to DRIVE to REVERSE.... so I completely agree and if it did shift by itself I would have it at the dealer ASAP!

 

[lightsout]

Installed a set of @ROAM flat fenders, and black stick on grille inserts on my Wife's Sport. The stock sport fenders were really limiting her available shock uptravel. We need to order some front inner fender liners, and measure/install shorter bumpstops.

Where is the blinker is is the tiny light the blinker?

 

[anotheraznguy]

Took off front bumper. Repainted it from a flat black to a flat gunmetal. Also painted and installed the motobilt rear bumper as well. And since i had some spare paint left, I sprayed the rock rings the same color.

 

[rustyshakelford]

Installed MetalCloak skids on Friday. Missing two bolts from an install error. Got the one standard bolt mixed up with a metric and stripped out the rivnut. MC was awesome getting me the specs so I could source locally. Then said they would rather just send me out what I needed to make sure everything was right. Great customer service

Brett

 

[melendez69]

Alien Sunshade installed.

Super easy!

Granite Crystal with Full Length Cherry Red Alien Sunshade.

Big shout out to @AlienSunshade for the great product and super fast shipping!

The red looks fantastic with the granite crystal.

Sponsored