3.0 MODS - Show em off

[2020 Diesel JL]

Do you have a pin of your powder coat oven? I too made one a couple years ago. Used about 2300 pop rivets! I hadn’t yet made the door when this pic was taken.

You can get these cabinets in a lot of different sizes. They are not cheap but will save a lot of time.
I just bought 2 acres around the corner from my house and will be meeting with builder today. They kids are gone now and I have a 3500 sq ft house. the new plane is 2300 sq ft house and a 3500 sq ft garage.

Sponsored

 

[See Through]

has anyone had experience with the Rugged Ridge Spartacas HD Tire Carrier Kit? I need to get one and dont want to pay mopars asking price. Also Thinking about metalcloaks version

Yes, I quite like mine. It feels really solid and I haven't had any issues with it

 

[Megatron JLU]

Couple of mods, waiting on parts for the lift.

37" Cooper's on kmc xd232's.
Motobilt tire carrier and license plate relocation bracket.
Warn 10s platinum winch

Lift will be a 3.5" Evo enforcer stage 4 with Fox 2.5" shocks.

View attachment 287505

View attachment 287509

View attachment 287511

 

[kosinar]

Couple of mods, waiting on parts for the lift.

37" Cooper's on kmc xd232's.
Motobilt tire carrier and license plate relocation bracket.
Warn 10s platinum winch

Lift will be a 3.5" Evo enforcer stage 4 with Fox 2.5" shocks.

View attachment 287505

View attachment 287509

View attachment 287511

Looking great. What winch plate did you use? I got the same tires on KMC 235. Is this lift tested with 3.0l diesel?

 

[Megatron JLU]

Looking great. What winch plate did you use? I got the same tires on KMC 235. Is this lift tested with 3.0l diesel?

Thank you. The lift is not tested on the diesel, we'll see how it goes.
I used this one:

 

[roll]

Thank you. The lift is not tested on the diesel, we'll see how it goes.
I used this one:

I put an untested Tera Flex lift on my diesel. I had to add a 1 inch spacer in front. Rides great. Better than stock. I originally bought the Falcon 3.3 Sp shocks but the right front would not fit because of extra battery. I ended up putting Falcon 2.1.

 

[kosinar]

Thank you. The lift is not tested on the diesel, we'll see how it goes.
I used this one:

 

[Megatron JLU]

I put an untested Tera Flex lift on my diesel. I had to add a 1 inch spacer in front. Rides great. Better than stock. I originally bought the Falcon 3.3 Sp shocks but the right front would not fit because of extra battery. I ended up putting Falcon 2.1.

Was it because of the reservoir? These fox shocks reservoirs mount separate from the shocks

 

[roll]

Was it because of the reservoir? These fox shocks reservoirs mount separate from the shocks

yes you'll be fine. The reservoir on the Falcons couldn't be moved.

 

[Beestmode]

Couple of mods, waiting on parts for the lift.

37" Cooper's on kmc xd232's.
Motobilt tire carrier and license plate relocation bracket.
Warn 10s platinum winch

Lift will be a 3.5" Evo enforcer stage 4 with Fox 2.5" shocks.

How do you like those Coopers? I'm between them and Nitto Ridge Grapplers

 

[roll]

Couple of mods, waiting on parts for the lift.

37" Cooper's on kmc xd232's.
Motobilt tire carrier and license plate relocation bracket.
Warn 10s platinum winch

Lift will be a 3.5" Evo enforcer stage 4 with Fox 2.5" shocks.
does the license plate kit come with light? looks great!

View attachment 287505

View attachment 287509

View attachment 287511

 

[Megatron JLU]

How do you like those Coopers? I'm between them and Nitto Ridge Grapplers

They are a pain to mount on beadlocks, but they have been great on the road. Not too noisy.

 

[Megatron JLU]

It does, it's quite a pain to wire though. All the rear inside trims must be removed. And you lose your oem third brake light as their kit does not come with a relocation bracket for it. I made my own and mounted it behind, inside the wheel.

 

[2020 Diesel JL]

Couple of mods, waiting on parts for the lift.

37" Cooper's on kmc xd232's.
Motobilt tire carrier and license plate relocation bracket.
Warn 10s platinum winch

Lift will be a 3.5" Evo enforcer stage 4 with Fox 2.5" shocks.

View attachment 287505

View attachment 287509

View attachment 287511

Love your jeep, looks great
I ordered a Warn 103253 VR EVO 10-S, And 101255 mounting kit. will that fit on the OEM steel bumper?

 

[2020 Diesel JL]

Thank you. The lift is not tested on the diesel, we'll see how it goes.
I used this one:

What Warn winch part number did you go with? I first ordered a WARN 103253 VR EVO 10-S then I seen a video showing that Warn make the same model that they say is JL ready WARN 89611 ZEON 10-S. From what I have read the 89611 has a different control lever that will not hit the OEM steel bumper. Amazon shows both not fitting the JL. I am getting confused and going to go broke. I ordered the 103253 then heard about the 89611 so I ordered that and tried to cancel the first one but Amazon won't cancel it. So now I have 2 coming this week. Then I get home from work and found that my wife ordered me a WARN 103253 VR EVO 10-S Electric as a surprise so now I have 3 different Warn winches due this week. what is the right one? See

Sponsored