Pixel Decals

[Dadams20]

I got my decals for Muttley.. I only get one chance to get this right, anyone have any tips on installing?

Sponsored

 

[cwadle]

From experience, super clean the surface. Apply them in an area which is as dust free as possible. Use painters tape to eyeball a location, then use a leveler to make sure it’s perfect. Repeat on the opposite side with a measuring tape. When you apply them, do it one half at a time. Use a rubber scraper or similar tool to make sure it’s firmly applied. Should look great!

 

[TrailTorque]

From experience, super clean the surface. Apply them in an area which is as dust free as possible. Use painters tape to eyeball a location, then use a leveler to make sure it’s perfect. Repeat on the opposite side with a measuring tape. When you apply them, do it one half at a time. Use a rubber scraper or similar tool to make sure it’s firmly applied. Should look great!

Can you come do mine when they come in? I’m OCD so this will take me about 12 hours to install lol

 

[Ma$$iveDebtAche]

Use a spray bottle with water and a few drops of dish soap. Spray down the application surface and vinyl, liberally. Use a squeegee(below) to work out water and air bubbles.

 

[Dadams20]

From experience, super clean the surface. Apply them in an area which is as dust free as possible. Use painters tape to eyeball a location, then use a leveler to make sure it’s perfect. Repeat on the opposite side with a measuring tape. When you apply them, do it one half at a time. Use a rubber scraper or similar tool to make sure it’s firmly applied. Should look great!

Thank you! That’s a big help, I’m going with the wet method to make it easier to get any bubbles out .. hope I don’t screw this up!

 

[Dadams20]

Drivers side is done!

 

[Medsker]

Looks Great! Was it as difficult as you thought?

 

[Kyanche]

LOL that dog. I remember that cartoon lol. Cool stickers!

 

[Dadams20]

Looks Great! Was it as difficult as you thought?

It was a lot easier than I thought it would be .. I screwed up a bit and was still able to correct the angle and get it right , happy with the outcome !

 

[jntrees]

Drivers side is done!

Looks awesome man!

 

[melendez69]

Drivers side is done!

I'm also of the Dick Dastardly generation

Stop that pigeon!

 

[digitalbliss]

Drivers side is done!

I like the color combination!

 

[robaw]

I got my decals for Muttley.. I only get one chance to get this right, anyone have any tips on installing?

Totally dig the decals! One thing though - I assume you got them from Pixel Decals, but that's not what the thread title says...

 

[TrailTorque]

Spray down the application surface and vinyl, liberally.

But I’m a conservative though.. Are there any other ways to install? I don’t really want to conform. LOL

Nice user name btw haha

 

[TrailTorque]

Drivers side is done!

Dude that came out perfect!

Sponsored