Riotfunk
Well-Known Member
- Thread starter
- #1
So my jeep was involved in a low speed head on collision approx 8 months ago where some kid nodded out and drove into me. It’s a 22 two door Willy’s. The shop replaced the front bumper and some other things they said they did but actually didn’t. I just got it back. It’s been aligned about 8 times and it’s still so messed up is dangerous to drive and have no recourse but to fix myself.
I have a 2” lift, rancho front track bar and rear track bar relocation bracket, mopar extended LCA. It drove perfect before this. 90mph on highway and tracked straight. Now I can’t do 30 without feeling like I’m going to die.
I found out the dealer that did the work put a regular LCA on it and left one longer one. I think the mopar lift ones are 1/8”-1/4” longer. So there’s that. I ordered two new LCA to put on. If I hit a bump or uneven road where the wheels are going up and down it turn towards that side when the one wheel is lower.
When going straight the jeep pulls right pretty bad. Is also affected under braking. The ball joints were replaced and an axle tube I believe. The insurance still will not provide a detailed work order same with the dealer. They stated they replaced parts that they didn’t, track bar is the one I put on. Is my only vehicle and is undrivable. Here is photos of it at full lock where I can feel it binding up.
What should I look at to do to make it right. When I installed everything it was perfect. Now I have to rely on ships since I injured my back and cannot do the work myself
I have a 2” lift, rancho front track bar and rear track bar relocation bracket, mopar extended LCA. It drove perfect before this. 90mph on highway and tracked straight. Now I can’t do 30 without feeling like I’m going to die.
I found out the dealer that did the work put a regular LCA on it and left one longer one. I think the mopar lift ones are 1/8”-1/4” longer. So there’s that. I ordered two new LCA to put on. If I hit a bump or uneven road where the wheels are going up and down it turn towards that side when the one wheel is lower.
When going straight the jeep pulls right pretty bad. Is also affected under braking. The ball joints were replaced and an axle tube I believe. The insurance still will not provide a detailed work order same with the dealer. They stated they replaced parts that they didn’t, track bar is the one I put on. Is my only vehicle and is undrivable. Here is photos of it at full lock where I can feel it binding up.
What should I look at to do to make it right. When I installed everything it was perfect. Now I have to rely on ships since I injured my back and cannot do the work myself
Sponsored