Metalcloak Bump Stops

[h41g]

Hey guys. I noticed my front bump stops are not straight. Passenger side is almost touching the coil. I asked the shop and they said because of the caster setting. Does this seem normal, or anything to be concerned about? Thanks

Sponsored

 

[firedude]

Not normal at ride height. Check and see if the axle is centered. Measure coil bucket to inside of tire on both sides.

 

[NateCO]

I was just looking at the game changer install instructions and it mentioned that those pucks will just compress down as you tighten the bolt on top. Maybe it was tightened too much and is causing the stack to lean to the side?

Sponsored