JL Mopar LED upgrade

[Aziz bozood]

Hi,

I'm from Dubai, here we have LED (Rubicon) bud Ya Halo.
It is interesting because we have 3 wires on car harness and LED ...

The connector is made of LED headlamps and has 3 pins and 3 wires ...

Reverse located in US only 4 pins ...

But it may be that we have bulbs with only 3 pins and no ring is installed ...

I will ask the Mopar 82215136 LED Headlamp Pair ...

Will the halo work for the installation of new lighting ...

Does anyone try changing the led lighting for the sport pocket and tuning ...

Sponsored

 

[EgGreg]

The power wire for the halo is the fourth wire. But there is no wire to attach to. I’ve made a adapter but you have to run a wire to either fuse box to a fuse tap or splice into side light wiring.

Someone else in UAE told me you cannot add wires (maybe legally) or void warranty.

If you have halogen light originally You will also need a dealer flash to correct flickering and make low beam stay on when you switch to highbeam.

 

[Sbjlu]

The power wire for the halo is the fourth wire. But there is no wire to attach to. I’ve made a adapter but you have to run a wire to either fuse box to a fuse tap or splice into side light wiring.

Someone else in UAE told me you cannot add wires (maybe legally) or void warranty.

If you have halogen light originally You will also need a dealer flash to correct flickering and make low beam stay on when you switch to highbeam.

Do you make these to sell? If so how much?

Sponsored