Jack Stands - 25in+

[Redbaron73]

I have a great set of Esco jack stands. They work great for most of my work, including the installation of my 3.5" lift. The problem I ran into is they had to be used at max height (21") for the install. And are almost too short to support the frame with the 37" wheels.

I am looking for a recommendation for stands that will support the frame safely that are taller. I prefer 30" stands, so that I don't have to max them out.

Sponsored

 

[RPS1030]

I’ve got 2 sets of 12 Ton Stands that get to almost 30”. 1 from Harbor Freight 1 from Northern Tool (lots of years on that set).

 

[RPS1030]

Or activate hover-mode with a 2-post lift. Total game changer after almost dropping the crawler off the Jack stands.

 

[Redbaron73]

The 2 post would be nice!

 

[MarkY3130]

Pretty expensive but I have these in the 10 ton and 6 ton sizes. Made in USA. After using the recalled HF death trap ones for countless hours I moved on to these.

https://www.usjack.com/products/garage-jack-stands

Here’s the link to their online shop:

http://usjack-com.3dcartstores.com/Garage-Jack-Stands-PAIRS_c_12.html

 

[D60]

Well this thread is old but pipe stands are the answer. Most are good for 2500# per. Ridgid generally the least expensive

 

[ItsNo4RE]

Well this thread is old but pipe stands are the answer. Most are good for 2500# per. Ridgid generally the least expensive

Link?

Sponsored